Bump the all-julia-dependencies group across 2 directories with 3 updates

[dependabot]

Updates the requirements on Trixi, Pkg and Test to permit the latest version.
Updates Trixi to 0.17.9

Release notes

Sourced from Trixi's releases.

v0.17.9

Trixi v0.17.9

Diff since v0.17.8

Merged pull requests:

• Add explicitly thread = Trixi.Threaded() for TreeMesh3D DGSEM elixirs (#3252) (@​MarcoArtiano)
• Trixi.download: send GitHub token only to GitHub URL (#3254) (@​ranocha)
• load meshes from TrixiData.jl v0.1.1 (#3256) (@​ranocha)
• Fix calc_depressed_cubic_roots used by PositivityPreservingLimiterLiuZhang (#3259) (@​jlchan)

Changelog

Sourced from Trixi's changelog.

Changelog

Trixi.jl follows the interpretation of semantic versioning (semver) used in the Julia ecosystem. Notable changes will be documented in this file for human readability.

Changes in the v0.17 lifecycle

Added

• Contour plotting using Makie.jl is now supported for PlotData2DCartesian data (#3238).
• TimerOutputs.jl v1 is now supported in addition to v0.5 (#3172). When TimerOutputs.jl v1 is used, the new preference Trixi.set_timer_bars! toggles the bars visualizing the fraction of time and allocations spent in each section of the timer output of the SummaryCallback. The bars are disabled by default.
• TreeMesh and UnstructuredMesh2D now support flux-differencing volume kernel with FDSBP operators for conservative hyperbolic systems (#3187).
• The low-order FV scheme of VolumeIntegralSubcellLimiting can now be customized via volume_integral_low_order. It defaults to the first-order subcell finite volume scheme, while VolumeIntegralPureLGLFiniteVolumeO2 enables a second-order alternative (#3185).
• PlotData2D now visualizes finite volume data on a TreeMesh (polydeg = 0 DGSEM, or BlockFV) as distinct cells instead of interpolating between neighboring cell values, for both Plots.jl and Makie.jl (#3150).
• The GPU kernel of VolumeIntegralFluxDifferencing on P4estMesh{3}/T8codeMesh{3} can now be chosen via the new keyword argument flux_differencing_kernel of semidiscretize, either HalfSweep() (default), FullSweep(), or FullSweepGlobal (#3206).

Changed

• The diffusive eigenvalue estimate (max_diffusivity) for the Navier-Stokes equations has changed (#3192). The new estimate for the heat conduction eigenvalue does not involve the term 1/(gamma - 1). Thus, the cfl_parabolic might need to be reduced by this factor, which is for gamma = 1.4 a reduction factor of 2.5.

Changes when updating to v0.17 from v0.16.x

Changed

• The NonConservativeJump terms now require normal_direction_ll and normal_direction_rr as function arguments instead of the previous averaged normal_direction (#2890). This is necessary because the averaged normal_direction did not yield a consistent jump term.
• Renamed the hyperbolic right-hand side function rhs! to rhs_hyperbolic! at the semidiscretization and solver levels for consistency with rhs_parabolic! (#2921). The internal default_rhs helper now rejects SemidiscretizationHyperbolicParabolic, which has separate hyperbolic and parabolic right-hand sides and thus lacks a single default right-hand side function.
• The internal ODE right-hand side functions such as rhs_hyperbolic! and

... (truncated)

Commits

• 7edbe21 set version to v0.17.9
• db9b191 load meshes from TrixiData.jl v0.1.1 (#3256)
• 716b3dc Fix calc_depressed_cubic_roots used by `PositivityPreservingLimiterLiuZhang...
• 5196aba Trixi.download: send GitHub token only to GitHub URL (#3254)
• bf0f920 Add explicitly thread = Trixi.Threaded() for TreeMesh3D DGSEM elixirs (...
• aa2a842 set development version to v0.17.9-DEV
• feb8216 set version to v0.17.8
• b6ce784 Add Makie contour plots for PlotData2DCartesian (#3238)
• 1a222f0 Thread parallel time update for custom SSP method (#3221)
• 3633b77 Remove Juno from editor recommendations (#3249)
• Additional commits viewable in compare view

Updates Pkg to
Updates Trixi to 0.17.9

Release notes

Sourced from Trixi's releases.

v0.17.9

Trixi v0.17.9

Diff since v0.17.8

Merged pull requests:

• Add explicitly thread = Trixi.Threaded() for TreeMesh3D DGSEM elixirs (#3252) (@​MarcoArtiano)
• Trixi.download: send GitHub token only to GitHub URL (#3254) (@​ranocha)
• load meshes from TrixiData.jl v0.1.1 (#3256) (@​ranocha)
• Fix calc_depressed_cubic_roots used by PositivityPreservingLimiterLiuZhang (#3259) (@​jlchan)

Changelog

Sourced from Trixi's changelog.

Changelog

Trixi.jl follows the interpretation of semantic versioning (semver) used in the Julia ecosystem. Notable changes will be documented in this file for human readability.

Changes in the v0.17 lifecycle

Added

• Contour plotting using Makie.jl is now supported for PlotData2DCartesian data (#3238).
• TimerOutputs.jl v1 is now supported in addition to v0.5 (#3172). When TimerOutputs.jl v1 is used, the new preference Trixi.set_timer_bars! toggles the bars visualizing the fraction of time and allocations spent in each section of the timer output of the SummaryCallback. The bars are disabled by default.
• TreeMesh and UnstructuredMesh2D now support flux-differencing volume kernel with FDSBP operators for conservative hyperbolic systems (#3187).
• The low-order FV scheme of VolumeIntegralSubcellLimiting can now be customized via volume_integral_low_order. It defaults to the first-order subcell finite volume scheme, while VolumeIntegralPureLGLFiniteVolumeO2 enables a second-order alternative (#3185).
• PlotData2D now visualizes finite volume data on a TreeMesh (polydeg = 0 DGSEM, or BlockFV) as distinct cells instead of interpolating between neighboring cell values, for both Plots.jl and Makie.jl (#3150).
• The GPU kernel of VolumeIntegralFluxDifferencing on P4estMesh{3}/T8codeMesh{3} can now be chosen via the new keyword argument flux_differencing_kernel of semidiscretize, either HalfSweep() (default), FullSweep(), or FullSweepGlobal (#3206).

Changed

• The diffusive eigenvalue estimate (max_diffusivity) for the Navier-Stokes equations has changed (#3192). The new estimate for the heat conduction eigenvalue does not involve the term 1/(gamma - 1). Thus, the cfl_parabolic might need to be reduced by this factor, which is for gamma = 1.4 a reduction factor of 2.5.

Changes when updating to v0.17 from v0.16.x

Changed

• The NonConservativeJump terms now require normal_direction_ll and normal_direction_rr as function arguments instead of the previous averaged normal_direction (#2890). This is necessary because the averaged normal_direction did not yield a consistent jump term.
• Renamed the hyperbolic right-hand side function rhs! to rhs_hyperbolic! at the semidiscretization and solver levels for consistency with rhs_parabolic! (#2921). The internal default_rhs helper now rejects SemidiscretizationHyperbolicParabolic, which has separate hyperbolic and parabolic right-hand sides and thus lacks a single default right-hand side function.
• The internal ODE right-hand side functions such as rhs_hyperbolic! and

... (truncated)

Commits

• 7edbe21 set version to v0.17.9
• db9b191 load meshes from TrixiData.jl v0.1.1 (#3256)
• 716b3dc Fix calc_depressed_cubic_roots used by `PositivityPreservingLimiterLiuZhang...
• 5196aba Trixi.download: send GitHub token only to GitHub URL (#3254)
• bf0f920 Add explicitly thread = Trixi.Threaded() for TreeMesh3D DGSEM elixirs (...
• aa2a842 set development version to v0.17.9-DEV
• feb8216 set version to v0.17.8
• b6ce784 Add Makie contour plots for PlotData2DCartesian (#3238)
• 1a222f0 Thread parallel time update for custom SSP method (#3221)
• 3633b77 Remove Juno from editor recommendations (#3249)
• Additional commits viewable in compare view

Updates Test to

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions

[dependabot]

Looks like these dependencies are updatable in another way, so this is no longer needed.