Final Calculator implementation ready for review

.gitattributes

@@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain

.gitignore

@@ -29,6 +29,7 @@ x86/
 bld/
 [Bb]in/
 [Oo]bj/
+[Oo]ut/
 [Ll]og/
 [Ll]ogs/
 
@@ -57,14 +58,11 @@ dlldata.c
 # Benchmark Results
 BenchmarkDotNet.Artifacts/
 
-# .NET
+# .NET Core
 project.lock.json
 project.fragment.lock.json
 artifacts/
 
-# Tye
-.tye/
-
 # ASP.NET Scaffolding
 ScaffoldingReadMe.txt
 
@@ -362,96 +360,4 @@ MigrationBackup/
 .ionide/
 
 # Fody - auto-generated XML schema
-FodyWeavers.xsd
-
-##
-## Visual studio for Mac
-##
-
-
-# globs
-Makefile.in
-*.userprefs
-*.usertasks
-config.make
-config.status
-aclocal.m4
-install-sh
-autom4te.cache/
-*.tar.gz
-tarballs/
-test-results/
-
-# Mac bundle stuff
-*.dmg
-*.app
-
-# content below from: https://github.com/github/gitignore/blob/master/Global/macOS.gitignore
-# General
-.DS_Store
-.AppleDouble
-.LSOverride
-
-# Icon must end with two \r
-Icon
-
-
-# Thumbnails
-._*
-
-# Files that might appear in the root of a volume
-.DocumentRevisions-V100
-.fseventsd
-.Spotlight-V100
-.TemporaryItems
-.Trashes
-.VolumeIcon.icns
-.com.apple.timemachine.donotpresent
-
-# Directories potentially created on remote AFP share
-.AppleDB
-.AppleDesktop
-Network Trash Folder
-Temporary Items
-.apdisk
-
-# content below from: https://github.com/github/gitignore/blob/master/Global/Windows.gitignore
-# Windows thumbnail cache files
-Thumbs.db
-ehthumbs.db
-ehthumbs_vista.db
-
-# Dump file
-*.stackdump
-
-# Folder config file
-[Dd]esktop.ini
-
-# Recycle Bin used on file shares
-$RECYCLE.BIN/
-
-# Windows Installer files
-*.cab
-*.msi
-*.msix
-*.msm
-*.msp
-
-# Windows shortcuts
-*.lnk
-
-# JetBrains Rider
-.idea/
-*.sln.iml
-
-##
-## Visual Studio Code
-##
-.vscode/*
-!.vscode/settings.json
-!.vscode/tasks.json
-!.vscode/launch.json
-!.vscode/extensions.json
-/Calculator.TomDonegan/TextFile1.txt
-/Calculator.TomDonegan/Calculator.TomDonegan/Notes.txt
-/Calculator
+FodyWeavers.xsd

CalculatorLibrary/CalculatorLibrary.cs

@@ -0,0 +1,114 @@
+namespace CalculatorLibrary
+{
+    // CalculatorLibrary.cs
+    using System.Diagnostics;
+    // Program.cs
+    using Newtonsoft.Json;
+    public class Calculator
+    {
+        // CalculatorLibrary.cs
+        JsonWriter writer;
+
+        public Calculator()
+        {
+            StreamWriter logFile = File.CreateText("calculatorlog.json");
+            logFile.AutoFlush = true;
+            writer = new JsonTextWriter(logFile);
+            writer.Formatting = Formatting.Indented;
+            writer.WriteStartObject();
+            writer.WritePropertyName("Operations");
+            writer.WriteStartArray();
+        }
+
+        // CalculatorLibrary.cs
+        public double DoOperation(double num1, double num2, string op)
+        {
+            double result = double.NaN; // Default value is "not-a-number" if an operation, such as division, could result in an error.
+            writer.WriteStartObject();
+            writer.WritePropertyName("Operand1");
+            writer.WriteValue(num1);
+            writer.WritePropertyName("Operand2");
+            writer.WriteValue(num2);
+            writer.WritePropertyName("Operation");
+
+            // Use a switch statement to do the math.
+            switch (op)
+            {
+                case "a":
+                    result = num1 + num2;
+                    writer.WriteValue("Add");
+                    break;
+                case "s":
+                    result = num1 - num2;
+                    writer.WriteValue("Subtract");
+                    break;
+                case "m":
+                    result = num1 * num2;
+                    writer.WriteValue("Multiply");
+                    break;
+                case "d":
+                    // Ask the user to enter a non-zero divisor.
+                    if (num2 != 0)
+                    {
+                        result = num1 / num2;
+                    }
+                    writer.WriteValue("Divide");
+                    break;
+                case "sq":
+                    if(num1 >= 0)
+                    {
+                        result = Math.Sqrt(num1);
+                    }
+                    writer.WriteValue("Square Root");
+                    break;
+                case "sq2":
+                    if(num1 >= 0 && num2 != 0)
+                    {
+                        result = Math.Pow(num1, 1/num2);
+                    }
+                    writer.WriteValue("Nth Root");
+                    break;
+                case "10":
+                    result = Math.Pow(10, num1);
+                    writer.WriteValue("10^x");
+                    break;
+                case "cos":
+                    result = Math.Cos(num1);
+                    writer.WriteValue("Cosine");
+                    break;
+                case "sin":
+                    result = Math.Sin(num1);
+                    writer.WriteValue("Sine");
+                    break;
+                case "tan":
+                    result = Math.Tan(num1);
+                    writer.WriteValue("Tangent");
+                    break;
+                case "log":
+                    if (num1 > 0)
+                    {
+                        result = Math.Log10(num1);
+                    }
+                    writer.WriteValue("Logarithm base 10");
+                    break;
+
+                // Return text for an incorrect option entry.
+                default:
+                    break;
+            }
+            writer.WritePropertyName("Result");
+            writer.WriteValue(result);
+            writer.WriteEndObject();
+
+            return result;
+        }
+        // CalculatorLibrary.cs
+        public void Finish()
+        {
+            writer.WriteEndArray();
+            writer.WriteEndObject();
+            writer.Close();
+        }
+    }
+
+}

CalculatorLibrary/CalculatorLibrary.csproj

@@ -0,0 +1,13 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+  <PropertyGroup>
+    <TargetFramework>net10.0</TargetFramework>
+    <ImplicitUsings>enable</ImplicitUsings>
+    <Nullable>enable</Nullable>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <PackageReference Include="Newtonsoft.Json" Version="13.0.4" />
+  </ItemGroup>
+
+</Project>

ConsoleCalculator.Brandonscodedata.slnx

@@ -0,0 +1,4 @@
+<Solution>
+  <Project Path="CalculatorLibrary/CalculatorLibrary.csproj" Id="e7938069-87c0-4c39-91c8-f7fefc64bee1" />
+  <Project Path="ConsoleCalculator.Brandonscodedata/ConsoleCalculator.Brandonscodedata.csproj" />
+</Solution>

ConsoleCalculator.Brandonscodedata/CalcData.cs

@@ -0,0 +1,28 @@
+using System;
+using System.Collections.Generic;
+using System.Text;
+
+namespace ConsoleCalculator.Brandonscodedata
+{
+    internal class CalcData
+    {
+        public int CalculationRound { get; init; }
+
+        public double CalculationNumberOne { get; init; }
+
+        public double CalculationNumberTwo { get; init; }
+
+        public string CalculationOperator { get; init; }
+
+        public double CalculationResult { get; init; }
+
+        public CalcData(int round, double num1, double num2, string op, double result)
+        {
+            CalculationRound = round;
+            CalculationNumberOne = num1;
+            CalculationNumberTwo = num2;
+            CalculationOperator = op;
+            CalculationResult = result;
+        }
+    }
+}

ConsoleCalculator.Brandonscodedata/ConsoleCalculator.Brandonscodedata.csproj

@@ -0,0 +1,14 @@
+<Project Sdk="Microsoft.NET.Sdk">
+
+  <PropertyGroup>
+    <OutputType>Exe</OutputType>
+    <TargetFramework>net10.0</TargetFramework>
+    <ImplicitUsings>enable</ImplicitUsings>
+    <Nullable>enable</Nullable>
+  </PropertyGroup>
+
+  <ItemGroup>
+    <ProjectReference Include="..\CalculatorLibrary\CalculatorLibrary.csproj" />
+  </ItemGroup>
+
+</Project>