Repository navigation
HTS221
New documentation: View the migrated page.
Arduino library to support the HTS221 capacitive digital sensor for relative humidity and temperature.
-
HTS221Sensor(TwoWire*, uint8_t): class constructor
Params pointer to the I2C instance
Params (optional) address of the component's instance -
Enable: enable sensor
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
Disable: disable sensor
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
ReadID(uint8_t*): read ID address
Params pointer where store the ID of the device
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
Reset: reboot memory content
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
GetHumidity(float*): read output register and calculate the humidity
Params pointer to data
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
GetTemperature(float*): read output register and calculate the temperature
Params pointer to data
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
GetODR(float*): get the output data rate mode
Params pointer to data
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
SetODR(float*): set the output data rate mode
Params data rate to be set
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
ReadReg(uint8_t, uint8_t*): read data from register
Params register address
Params pointer to register data
Returns HTS221_STATUS_OK in case of success, an error code otherwise -
WriteReg(uint8_t, uint8_t): write data to register
Params register address
Params register data
Returns HTS221_STATUS_OK in case of success, an error code otherwise
Note
This library uses the Wire library presents in the STM32 core by default.
- DISCO_IOT_DataLogTerminal: reads temperature and humidity values and prints them.
You can find the source files at
https://github.com/stm32duino/HTS221
The HTS221 datasheet is available at
http://www.st.com/content/st_com/en/products/mems-and-sensors/humidity-sensors/hts221.html
Documentation moved The documentation has migrated to stm32duino.github.io and this wiki is no longer updated. The wiki will be disabled soon. Please contribute in the relevant repository that publishes its documentation through GitHub Pages (
gh-pages).
-
Advanced usages