feat(myuplink): record NIBE F750 hardware validation

CHANGELOG.md

@@ -1,5 +1,10 @@
 # Changelog
 
+## myuplink 1.2.3
+
+Record NIBE F750 as hardware-tested with the existing read-only MyUplink Cloud REST API v2 driver. OAuth connection and live telemetry were verified on an F750 in FTW; observed points included BT1 average outdoor temperature, BT12 condenser temperature and more than 100 additional heat-pump telemetry points. No control or write path is added.
+
+
 ## vag_vehicle 0.2.0
 
 Sign in with the account email and password instead of a pasted portal cookie, and sign in again when the portal session ends after about an hour (srcfl/device-drivers#143). The sign-in follows evcc's EU Data Act client: the identity form, the password page's `window._IDK` state, then the redirects back to the portal, skipping an optional marketing consent page. It needs an FTW Core with `host.http_request`. The host keeps the session cookies, and every redirect is a separate request checked against `allowed_hosts`. A failed sign-in waits 15 minutes before the next try, so a wrong password cannot lock the account. On an older Core, a pasted `cookie` works as before. `identity.vwgroup.io` joins `http_hosts`, `password` joins `config_secrets`, and the two sign-in form paths per brand are declared: the first in `auth_post_path`, so an older Core still accepts the driver, and the rest in `auth_post_paths`.

SUPPORT_STATUS.md

@@ -94,8 +94,8 @@ Catalog source is not proof that a target can install or run a driver.
 | kstar | 1.1.1 | blixt-l1 | not_assessed | — | not_recorded | not_assessed |
 | mennekes | 1.0.3 | ftw-core | not_assessed | — | not_recorded | not_assessed |
 | mennekes | 1.0.3 | blixt-l1 | not_assessed | — | not_recorded | not_assessed |
-| myuplink | 1.2.2 | ftw-core | not_assessed | — | not_recorded | not_assessed |
-| myuplink | 1.2.2 | blixt-l1 | not_assessed | — | not_recorded | not_assessed |
+| myuplink | 1.2.3 | ftw-core | not_assessed | — | not_recorded | not_assessed |
+| myuplink | 1.2.3 | blixt-l1 | not_assessed | — | not_recorded | not_assessed |
 | nibe_local | 1.2.1 | ftw-core | not_assessed | — | not_recorded | not_assessed |
 | nibe_local | 1.2.1 | blixt-l1 | not_assessed | — | not_recorded | not_assessed |
 | opendtu | 1.0.2 | ftw-core | not_assessed | — | not_recorded | not_assessed |

devices.yaml

@@ -951,12 +951,12 @@ manufacturers:
   - name: "MyUplink (NIBE, Bosch, Atlantic, Daikin, ...)"
     model_families:
       - name: "MyUplink Heat Pump (telemetry)"
-        variants: [NIBE F1145, NIBE F730, NIBE S1255]
+        variants: [NIBE F1145, NIBE F730, NIBE F750, NIBE S1255]
         regions: []
         protocols:
           - protocol: http
             driver: "myuplink"
-            version: "1.2.2"
+            version: "1.2.3"
             ders: [heatpump]
             control: false
         firmware_versions: ""

drivers/lua/myuplink.lua

@@ -48,7 +48,7 @@ DRIVER = {
   id           = "myuplink",
   name         = "MyUplink Heat Pump (telemetry)",
   manufacturer = "MyUplink (NIBE, Bosch, Atlantic, Daikin, ...)",
-  version      = "1.2.2",
+  version      = "1.2.3",
   protocols    = { "http" },
   capabilities = { "apicreds" },
   -- Says what the header, the description and driver_command have always
@@ -64,7 +64,7 @@ DRIVER = {
   homepage     = "https://dev.myuplink.com",
   http_hosts   = { "api.myuplink.com" },
   authors      = { "hannesb90", "FTW contributors" },
-  tested_models = { "NIBE F1145", "NIBE S1255", "NIBE F730" },
+  tested_models = { "NIBE F1145", "NIBE S1255", "NIBE F730", "NIBE F750" },
   verification_status = "experimental",
   config_secrets = { "client_secret", "refresh_token" },
 }

index.yaml

@@ -413,15 +413,15 @@ drivers:
     size_bytes: 3766
     sha256: "5f985b8917aea7b08fba13c02506b45e40232a763393dc6af7c6eeb6ab5853af"
   - name: "myuplink"
-    version: "1.2.2"
+    version: "1.2.3"
     tier: core
     protocol: http
     connectivity: cloud
     setup: [vendor_portal]
     ders: [heatpump]
     control: false
-    size_bytes: 17549
-    sha256: "0af1e129899c4c014b2e825d3efe13887dbc7f041cde6dbcb5496cc712e67bf9"
+    size_bytes: 17562
+    sha256: "1eca0cdd1cd2dabf772cba90b359d55e7c8f6e350e403623227e9a5a03b20d9c"
   - name: "nibe_local"
     version: "1.2.1"
     tier: core

manifests/myuplink.yaml

@@ -1,5 +1,5 @@
 name: "myuplink"
-version: "1.2.2"
+version: "1.2.3"
 tier: core
 author: "Sourceful Labs AB"
 protocol: http
@@ -10,7 +10,7 @@ control: false
 tested_devices:
   - manufacturer: "MyUplink (NIBE, Bosch, Atlantic, Daikin, ...)"
     model_family: "MyUplink Heat Pump (telemetry)"
-    variants: [NIBE F1145, NIBE S1255, NIBE F730]
+    variants: [NIBE F1145, NIBE S1255, NIBE F730, NIBE F750]
     regions: []
     firmware_versions: ""
     notes: "Read-only heat-pump telemetry via MyUplink Cloud REST API v2: compressor power + hot-water/indoor/outdoor temperatures. Observe-only — no control. OAuth: authorization-code + refresh-token (connect in Settings → Devices)."
@@ -21,9 +21,9 @@ upstream_docs:
     kind: changelog
     url_stability: stable
 min_host_version: "2.0.0"
-size_bytes: 17549
+size_bytes: 17562
 dkb_id: "myuplink"
-sha256: "0af1e129899c4c014b2e825d3efe13887dbc7f041cde6dbcb5496cc712e67bf9"
+sha256: "1eca0cdd1cd2dabf772cba90b359d55e7c8f6e350e403623227e9a5a03b20d9c"
 signature: ""
 
 bytecode_sha256: ""

support-status.json

@@ -947,7 +947,7 @@
     },
     {
       "catalog_source": true,
-      "catalog_version": "1.2.2",
+      "catalog_version": "1.2.3",
       "driver_id": "myuplink",
       "targets": {
         "blixt-l1": {