Repository navigation
feat(studuino): EPIC #2162 Studuino リニューアルと練習用の基板(topic・draft) - #2202
Draft
smalruby3-editor-bot[bot] wants to merge 30 commits into
Draft
smalruby3-editor-bot[bot] wants to merge 30 commits into
smalruby3-editor-bot[bot] wants to merge 30 commits into
Conversation
…s1 extension Write the decided direction (name, compatibility, sensor names, robot car heading, studuino. ruby, practice board, command and sensor log) and mark what is not implemented yet. Fix the outdated ruby examples and generator notes. Closes #2187 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
docs(studuino): Studuino リニューアルの方針を docs に書く
…stration - Show the smalrubotS1 extension as "Studuino(スタディーノ)" in the library, category, menu bar, connection and firmware modals (ja / ja-Hira / en). The extension ID, opcodes, Ruby methods and message keys are unchanged. - Replace the library images (600x372 / 95x95 / 40x40) and the category icon with a board illustration based on an image the maintainer made with Gemini. Silkscreen words that could look like Artec's product were removed. - Add Artec's trademark notice to the library card description and the about page. - Furigana for the smalrubot_s1 receiver is now "スタディーノ". Closes #2188 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…ary card Taken on the branch preview with headless Playwright. Refs #2188 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): rename the extension to Studuino and use a board illustration
…r a heading
- Show the sensors by their textbook names ("光センサー (A6)" etc.) and add
the "赤外線センサー(フォトリフレクタ)(A4)/(A5)" choices (new values ir_a4 /
ir_a5 read the same ports as left / right). No blocks are added.
- Move the robot blocks after a "ロボットカー" heading and use general wording
("車を前進させる" etc.). Opcodes, menu names and menu values are unchanged.
- Add BlockType.LABEL to scratch-vm (with Smalruby markers) so an extension
can show a heading (<label> in the flyout).
- Accept ir_a4 / ir_a5 in Ruby, and update furigana, snippets and docs.
Refs #2189
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
|
🚀 Preview deployed (stg API): https://preview.smalruby.app/topic-studuino-2162-1cd81df8/ |
…r heading Refs #2189 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): use textbook sensor names and group robot blocks under a heading
…alrubot_s1 The Ruby generator now writes studuino. (E9 of #2162). The converter registers the same table for both studuino and smalrubot_s1, so older programs and teaching materials still open as blocks. Furigana and completion work with both receivers; method names and opcodes are unchanged. Closes #2190 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(ruby): write studuino. and still read smalrubot_s1. for Studuino
…en no board is connected While the real Studuino is not connected, the blocks now use a practice board inside the VM: LEDs, DC motors (direction and speed), the D10 servo and the A2/A4/A5/A6/A7 sensors. The state is sent with the runtime event STUDUINO_PRACTICE_BOARD_STATE and kept on runtime.studuinoPracticeBoardState. The serial commands written while connected are unchanged. Closes #2191 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…m-2191 feat(studuino): practice board in the VM when no board is connected
…servo) Show a foldable panel at the top right of the code area while the Studuino extension is loaded. Sliders and a touch button change the practice board's sensors; LEDs, DC motors and the servo show their current state. While a real board is connected the panel only says so. It sits left of the lesson practice partner panel when that one is shown. Closes #2192 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
…the zoom buttons The extension's message keys are not in the GUI messages, so the panel has its own keys. Make the panel shorter (one-line title, touch sensor on one row) so it does not cover the zoom buttons at 1300x600. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): practice board panel (sensors, LEDs, motors, servo)
Record the LED / motor / servo commands and the sensor values the Studuino blocks read, in the block methods, so the real board and the practice board make the same entries (#2158 Q6 = A). The record is a ring buffer (1000) with getCommandLog / clearCommandLog and the STUDUINO_COMMAND_LOG events, and is cleared by the green flag and loading a project. The lesson goal gets boardCommand (with whenSensor: the sensor value read before the command, any sensor when no port/sensor is given, #2158 Q7) and sensorRead. Closes #2193 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): record the commands and sensor reads for lesson checks
…e board The teacher's text of the kit calls the whole kit ArtecRobo and the board Studuino. The library card, block category, menu bar and Ruby furigana now say ArtecRobo; the connection, firmware and practice board texts keep Studuino. The card and the about page name both, and the about page shows the board illustration instead of the Smalrubot photo. The extension ID, opcodes, menu values, message keys and the Ruby receiver (studuino. / smalrubot_s1.) do not change. Refs #2276 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Taken on the branch preview with headless Playwright. Adds the Ruby furigana and the about page. Refs #2276 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): name the extension ArtecRobo and keep Studuino for the board
The extension library shows the old "Smalrubot S1" card right after the "ArtecRobo (Studuino)" card until 2027-11-30, so teaching materials that say "choose Smalrubot S1" keep working. Both cards load the same extension smalrubotS1; the old card is only a library item with its own key, and choosing it shows an alert that the name has changed. The extension is now named "ArtecRobo (Studuino)" on the card, the block category and the menu bar (ja: アーテックロボ(Studuino)). The card description, the trademark sentence and the furigana stay as they are. Closes #2281 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Refs #2281 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The info level has no background, so the text was hard to read over the connection modal. Use the info-blue level. Refs #2281 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
… and the old card Refs #2281 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): keep the Smalrubot S1 card for one year and name the extension ArtecRobo (Studuino)
Answers to the final review before develop (F1-F4): - F1: the extension name, category, menu bar and notices are now just "アーテックロボ" / "ArtecRobo"; the card description names Studuino - F3: the card description starts "アーテックロボの Studuino®(スタディーノ)基板を動かす" - F4: new card, connection and category pictures cut from the human's Gemini illustration (mini icon in the corner and the outer frame removed) Refs #2162 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
feat(studuino): call every label ArtecRobo and use the new board picture
This branch was successfully deployed
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
EPIC #2162 の topic(draft)
スモウルボットS1 の拡張機能を Studuino としてリニューアルし、練習用の基板を入れる EPIC #2162 の作業を集める topic ブランチ(
.claude/rules/topic-branches.md)。studuino./feat(studuino): 実機がつながっていないとき、命令とセンサーを練習用の基板(VM)に切りかえる #2191 練習用の基板(VM)/feat(studuino): 練習用の基板のパネル(たためる・センサーのスライダーとボタン・LED/モーター/サーボの状態) #2192 パネル/feat(studuino): 拡張機能が出した命令と読んだセンサーの値を記録する(レッスンの判定用) #2193 命令とセンサーの値の記録/feat(studuino): 拡張機能の名前をアーテックロボにする(基板は Studuino) #2276 名前を「アーテックロボ(ArtecRobo)」に(基板は Studuino。Ruby は studuino.・ふりがなはアーテックロボ)🤖 Generated with Claude Code