NotAKeyboard

Another USB HID device. The name is inspired by NaK, the extremely dangerous Na and K alloy.

This project is intended for educational and learning purposes only. It is not designed, tested, or intended for use in production, commercial, or real-world environments. The authors assume no responsibility for any misuse of this material.

Setup

• You first need to conect GPIO11 with a switch to GND like the upper image, set the switch to off
• Connect the Raspberry Pi Pico to your computer while holding down the BOOTSEL button. When it appears as a removable storage device, release the BOOTSEL button.
• Download this repository and extract it, open the format_pico folder from the files provided. Copy the flash_nuke.uf2 file to the Raspberry Pi Pico. Wait until it restarts. This process clears the existing firmware.
• Open the software folder. Copy the adafruit-circuitpython-raspberry_pi_pico-en_US-9.1.1.uf2 file to your Raspberry Pi Pico. Wait until it restarts. After restarting, the Pico should appear as a drive named CIRCUITPY.
• Copy the lib folder on the CIRCUITPY drive, click replace if it asks.
• Copy the payload.py, code.py and boot.py, click replace if it asks. Congratulations! Your NaK is set up and ready to go. (WARNING: MAKE SURE THAT THE SWITCH ISEN'T ON)

Payloads

Head to DDConverter and paste your script click convert(keep in mind that very mutch DuckyScript dosen't work.) then download and plug in the pico with the switch off. Copy the payload.py you downloaded to the root of your pico and click replace if it asks.

Usage

Eject and unplug the pico from your device. Turn the switch on.

Warning: As long as the pico has the switch on it will be armed. That means if you plug it in white armed it will run the payload with very fast speeds. YOU HAVE BEEN WARNED. I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED TO DEVICES.

Editing the payload

Take your pico and turn the switch off plug it in and edit

Have fun.

NotAKeyboard site