All pull requests

Pull requests

• Take the geometry-table extrema from the stored contour with signed comparisons

  #37·CharlesCNorton opened Oct 11, 2026Contributor·

  ·

• Take each sum_atan term at s = 1 as its limit from below

  #36·CharlesCNorton opened Oct 11, 2026Contributor·

  ·

• Store the last evaluated state as the restart backup

  #35·CharlesCNorton opened Oct 1, 2026Contributor·

  ·

• spline_akima: mask the slope weights by their own denominator

  #34·CharlesCNorton opened Sep 21, 2026Contributor·

  ·

• Size the T_l recurrence passes of the analytic add-back by their growth rate

  #33·CharlesCNorton opened Sep 9, 2026Contributor·

  ·

• Take the vacuum magnetic pressure alone as the total pressure outside the free boundary

  #32·CharlesCNorton opened Sep 9, 2026Contributor·

  ·

• Pair each analytic vacuum coefficient with the mode the caller supplies it for

  #31·CharlesCNorton opened Sep 9, 2026Contributor·

  ·

• Write the cos part of grpmn and bvec for lasym

  #30·CharlesCNorton opened Sep 7, 2026Contributor·

  ·

• Initialize the coarse retry after a bad initial Jacobian

  #29·philippbogdan opened Sep 6, 2026·

  ·

• Orient a lasym boundary by its m=1 determinant and rotate it for the flip

  #28·CharlesCNorton opened Sep 3, 2026Contributor·

  ·
  1

• Take bu0 at its own half-grid surface in the asymmetric current harmonics

  #26·CharlesCNorton opened Sep 3, 2026Contributor·

  ·
  1

• Carry B_s to the wout file on the full radial mesh

  #25·CharlesCNorton opened Sep 3, 2026Contributor·

  ·
  1

• Scan every toroidal plane for the axis guess of a lasym run

  #24·CharlesCNorton opened Sep 3, 2026Contributor·

  ·
  1

• Scan the complete cross-section for the geometry table of a lasym run

  #20·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Take bmin and bmax over every stored poloidal line

  #19·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Initialize potvac and the aux_f profile arrays before they reach the wout file

  #16·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Keep rmaga inside rzl_array for lasym with ntor = 0

  #15·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Initialize the full-mesh bsubs in jxbforce

  #14·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Extrapolate chipf onto the axis and the boundary like iotaf

  #13·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Carry signgs in chi

  #12·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1

• Remove the lasym output doubling that compensated the old fixaray norm

  #11·CharlesCNorton opened Sep 2, 2026Contributor·

  ·
  1