chore(deps-dev): bump phpunit/phpunit from 12.5.39 to 13.4.3 in /tools/phpunit

[dependabot]

Bumps phpunit/phpunit from 12.5.39 to 13.4.3.

Release notes

Sourced from phpunit/phpunit's releases.

PHPUnit 13.4.3

Fixed

• The dependencies of a test that are listed after a dependency on a test that does not return a value, or after a dependency on a larger test, were not checked, so the test was run instead of being skipped when one of these dependencies had not passed
• Tests could not be run in process isolation when the namespace of the test class begins with a name that the code of the child process imports, for instance CodeCoverage or Facade
• A test that is run in process isolation aborts the test run when its data set or a value returned by a test it depends on cannot be serialized, for instance because it is a closure
• When a before-first-test method or an after-last-test method errors or fails, the remaining methods of the same kind are still called, and each of them that does not error or fail itself is reported with the exception of the earlier method
• When a hook method of a test, for instance a #[Before] method, skips the test, the remaining hook methods of the same kind are still called, so the test is reported as errored instead of skipped when one of them errors
• An error or failure in a before-first-test method or an after-last-test method that is called again in the child process of a test that is run in process isolation is reported twice, once for the test class and once for the test
• When a before-first-test method errors, the progress output shows one E for the test class instead of one for each of its tests, only one of its tests is counted as run, and the test that is run next is shown as an error
• When a before-first-test method fails, the progress output shows nothing for the tests of the test class and only one of them is counted as run
• The Open Test Reporting XML logfile has no start for a test that errors before it is prepared, for instance because it depends on a test that does not exist, and no end for the test that is run after a test that is skipped because a test it depends on did not pass or because one of its requirements is not met
• The Open Test Reporting XML logfile has no entry for a test that is marked as incomplete before it is prepared, for instance in setUp(), and reports the test that is run after it as aborted with the message of the incomplete test
• The Open Test Reporting XML logfile has no end for the test that is run after a test whose preparation errors, for instance because setUp() raises an exception or the global state cannot be backed up
• The Open Test Reporting XML logfile reports a test that has more than one outcome, for instance because tearDown() fails after the test errored, with its last outcome instead of its most severe one, and with more than one end when the preparation of the test errored
• The Open Test Reporting XML logfile is not well-formed when a test name, a message, the output of a test, or the string representation of an exception contains ]]>, bytes that are not valid UTF-8, or characters that are not allowed in XML, for instance the escape character of an ANSI escape sequence
• The Open Test Reporting XML logfile reports an issue that is triggered before a test is prepared, for instance in setUp(), with an empty ID before the start of the test

---

Learn how to install or update PHPUnit 13.4 in the documentation.

Keep up to date with PHPUnit:

• You can follow @​phpunit@phpc.social to stay up to date with PHPUnit's development.
• You can subscribe to the PHPUnit Updates newsletter to receive updates about and tips for PHPUnit.

PHPUnit 13.4.2

Fixed

• #7033: Compact printer is created although an extension replaces the progress output
• #7035: Sorting tests by duration recomputes the duration of a test suite for every comparison
• Sorting tests by size recomputes the size of a test suite for every comparison
• expectUserDeprecationMessage() and expectUserDeprecationMessageMatches() did not see the deprecations triggered by an attempt of a retried test and saw those of the previously run test instead
• The status of a test whose mock object raises an exception in its destructor is success although the test is reported as errored, so #[Retry] does not retry the test, --repeat does not skip the remaining repetitions, tearDown() sees the wrong status, and code coverage records the test as successful
• Named arguments passed to with() were matched by position instead of by name, so an expectation such as ->with(b: 7) compared the expected value with the first parameter of the method and the parameter named $b was not checked
• String keys of the parameter sets passed to withParameterSetsInOrder(), withParameterSetsInAnyOrder(), and withParameterSetsInPartialOrder() were ignored, so a parameter set such as ['b' => 7] compared the expected value with the first parameter of the method and the parameter named $b was not checked

---

Learn how to install or update PHPUnit 13.4 in the documentation.

Keep up to date with PHPUnit:

• You can follow @​phpunit@phpc.social to stay up to date with PHPUnit's development.
• You can subscribe to the PHPUnit Updates newsletter to receive updates about and tips for PHPUnit.

... (truncated)

Changelog

Sourced from phpunit/phpunit's changelog.

[13.4.3] - 2026-10-16

Fixed

• The dependencies of a test that are listed after a dependency on a test that does not return a value, or after a dependency on a larger test, were not checked, so the test was run instead of being skipped when one of these dependencies had not passed
• Tests could not be run in process isolation when the namespace of the test class begins with a name that the code of the child process imports, for instance CodeCoverage or Facade
• A test that is run in process isolation aborts the test run when its data set or a value returned by a test it depends on cannot be serialized, for instance because it is a closure
• When a before-first-test method or an after-last-test method errors or fails, the remaining methods of the same kind are still called, and each of them that does not error or fail itself is reported with the exception of the earlier method
• When a hook method of a test, for instance a #[Before] method, skips the test, the remaining hook methods of the same kind are still called, so the test is reported as errored instead of skipped when one of them errors
• An error or failure in a before-first-test method or an after-last-test method that is called again in the child process of a test that is run in process isolation is reported twice, once for the test class and once for the test
• When a before-first-test method errors, the progress output shows one E for the test class instead of one for each of its tests, only one of its tests is counted as run, and the test that is run next is shown as an error
• When a before-first-test method fails, the progress output shows nothing for the tests of the test class and only one of them is counted as run
• The Open Test Reporting XML logfile has no start for a test that errors before it is prepared, for instance because it depends on a test that does not exist, and no end for the test that is run after a test that is skipped because a test it depends on did not pass or because one of its requirements is not met
• The Open Test Reporting XML logfile has no entry for a test that is marked as incomplete before it is prepared, for instance in setUp(), and reports the test that is run after it as aborted with the message of the incomplete test
• The Open Test Reporting XML logfile has no end for the test that is run after a test whose preparation errors, for instance because setUp() raises an exception or the global state cannot be backed up
• The Open Test Reporting XML logfile reports a test that has more than one outcome, for instance because tearDown() fails after the test errored, with its last outcome instead of its most severe one, and with more than one end when the preparation of the test errored
• The Open Test Reporting XML logfile is not well-formed when a test name, a message, the output of a test, or the string representation of an exception contains ]]>, bytes that are not valid UTF-8, or characters that are not allowed in XML, for instance the escape character of an ANSI escape sequence
• The Open Test Reporting XML logfile reports an issue that is triggered before a test is prepared, for instance in setUp(), with an empty ID before the start of the test

[13.4.2] - 2026-10-12

Fixed

• #7033: Compact printer is created although an extension replaces the progress output
• #7035: Sorting tests by duration recomputes the duration of a test suite for every comparison
• Sorting tests by size recomputes the size of a test suite for every comparison
• expectUserDeprecationMessage() and expectUserDeprecationMessageMatches() did not see the deprecations triggered by an attempt of a retried test and saw those of the previously run test instead
• The status of a test whose mock object raises an exception in its destructor is success although the test is reported as errored, so #[Retry] does not retry the test, --repeat does not skip the remaining repetitions, tearDown() sees the wrong status, and code coverage records the test as successful
• Named arguments passed to with() were matched by position instead of by name, so an expectation such as ->with(b: 7) compared the expected value with the first parameter of the method and the parameter named $b was not checked
• String keys of the parameter sets passed to withParameterSetsInOrder(), withParameterSetsInAnyOrder(), and withParameterSetsInPartialOrder() were ignored, so a parameter set such as ['b' => 7] compared the expected value with the first parameter of the method and the parameter named $b was not checked

[13.4.1] - 2026-10-05

Changed

• The Software Bill of Materials (SBOM) embedded in the PHAR now uses CycloneDX 1.7 and provides the NTIA minimum elements as well as the data fields that BSI TR-03183-2 (version 2.1.0) requires for logical and identified components, including component creators, original, distribution and effective licences, source code URIs, and the PHP runtime and its extensions as external components

Fixed

• #7029: TestSuite::runTests() doubles garbage collector time when zend.exception_ignore_args is off
• setUpBeforeClass() and tearDownAfterClass() were run twice for a test class that is the only test class in a test suite of the XML configuration file that has the name of that test class
• Tests could not be run in process isolation when the path of the bootstrap script, the test file, or the directory for temporary files contained a single quote
• Arguments in the --ARGS-- section of a PHPT test that start with - were interpreted by PHP instead of being passed to the test when the test also has a --STDIN-- section
• Recording the tests that passed in a child process copied all tests that had passed so far, which made running many tests in process isolation increasingly slow

[13.4.0] - 2026-10-02

... (truncated)

Commits

• 2180c47 Prepare release
• 79873ca Merge branch '12.5' into 13.4
• 76bd319 Prepare release
• 7460cb3 Update actions/setup-java action to v6.1.0
• f173495 Update actions/setup-java action to v6.1.0
• 606ee7d Merge branch '12.5' into 13.4
• ac83bb8 Update ChangeLog
• cba4ce6 Report an issue that is triggered before a test is prepared, for instance in ...
• 5564d7a Merge branch '12.5' into 13.4
• 067047c Remove code that is no longer needed now that before-first-test and after-las...
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)