Add MOCREO ST7-CL support

custom_components/ble_monitor/ble_parser/__init__.py

@@ -554,8 +554,8 @@ def parse_advertisement(
                             # Inkbird
                             sensor_data = parse_inkbird(self, man_spec_data, local_name, mac)
                             break
-                        elif comp_id == 0x004A and local_name == "ST7" and data_len == 0x11:
-                            # Mocreo ST7, see below under local_name checks for the other Mocreo models
+                        elif comp_id == 0x004A and local_name in ["ST7", "ST7-CL"] and data_len == 0x11:
+                            # Mocreo ST7/ST7-CL, see below under local_name checks for the other Mocreo models
                             sensor_data = parse_mocreo(self, man_spec_data, local_name, mac)
                             break
                         else:

custom_components/ble_monitor/ble_parser/mocreo.py

@@ -8,6 +8,7 @@
 
 MOCREO_TYPE_DICT = {
     0x10: "ST7",
+    0x85: "ST7-CL",
     0x81: "ST5",
     0x82: "SW2",
     0x83: "ST6",
@@ -32,6 +33,9 @@
     0x10: {
         "temperature": (5, 0, -16, True, lambda x: x / 100),
     },
+    0x85: {
+        "temperature": (5, 0, -16, True, lambda x: x / 100),
+    },
     0x81: {
         "temperature": (6, 0, -16, True, lambda x: x / 100),
     },

custom_components/ble_monitor/const.py

@@ -2242,6 +2242,7 @@ class BLEMonitorBinarySensorEntityDescription(
     'SW2'                     : [["battery", "rssi"], [], ["water leak"]],
     'ST6'                     : [["temperature", "humidity", "battery", "rssi"], [], []],
     'ST7'                     : [["temperature", "battery", "rssi"], [], []],
+    'ST7-CL'                  : [["temperature", "rssi"], [], []],
     'ST8'                     : [["temperature", "battery", "rssi"], [], []],
     'ST9'                     : [["temperature", "humidity", "battery", "rssi"], [], []],
     'ST10'                    : [["temperature", "battery", "rssi"], [], []],
@@ -2399,6 +2400,7 @@ class BLEMonitorBinarySensorEntityDescription(
     'SW2'                     : 'MOCREO',
     'ST6'                     : 'MOCREO',
     'ST7'                     : 'MOCREO',
+    'ST7-CL'                  : 'MOCREO',
     'ST8'                     : 'MOCREO',
     'ST9'                     : 'MOCREO',
     'ST10'                    : 'MOCREO',

docs/_devices/MOCREO_ST7-CL.md

@@ -0,0 +1,28 @@
+---
+manufacturer: MOCREO
+name: Temperature Controller
+model: ST7-CL
+image: MOCREO_ST7-CL.png
+physical_description: Compact MOCREO temperature controller / sensor with a BLE broadcast packet that follows the same base ST7 frame structure but advertises the ST7-CL model identifier.
+broadcasted_properties:
+  - temperature
+  - rssi
+broadcasted_property_notes:
+  - AC-powered device; battery is not a relevant advertised entity for ST7-CL.
+broadcast_rate:
+active_scan: no
+encryption_key:
+custom_firmware:
+notes: >
+  This MOCREO device uses the same BLE advertisement family as the earlier ST7 model, but the app identifies the payload as ST7-CL using the model byte 0x85 in the manufacturer payload.
+
+  The packet layout follows the existing MOCREO parsing logic for the ST7 family:
+    - company identifier 0x004A
+    - local name "ST7-CL"
+    - manufacturer payload length 0x11
+    - device type byte at offset 1 in the common payload
+    - temperature extracted from the signed 16-bit field at byte 5, bit 0, with a scale of 0.01 °C
+    - battery is not treated as a valid advertised entity for this AC-powered controller
+
+  Thermostat bounds and relay state are not available in BLE advertisements.
+---