Integration will not connect

[Menz01]

Describe the bug

integration will no longer connect and i see this:

Failed setup, will retry: Modbus error: Modbus Error: [Input/Output] Request cancelled outside pymodbus

Expected behavior

after a restart of the system i am expecting the integration to connect as it always had been

Screenshots

Diagnostic File

i don't see a "download diagnostics"

Debug logs

everytime i try and upload i am told its too long. not sure what to trim out that you may need to see

Home Assistant Version

2025.7.1

solaredge-modbus-multi Version

3.1.4

Installation Type

HAOS

Read the Instructions

• My configuration follows https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Configuration
• I have read the Known Issues https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Known-Issues
• This issue is not about a template error (do not report template errors, read https://github.com/WillCodeForCats/solaredge-modbus-multi/wiki/Template-Design-Notes)

Additional Context

No response

[Menz01]

trimmed this part out of the debug logs...

ValueError: 299 is not a valid HTTPStatus
2025-07-10 10:14:46.974 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] solaredge_modbus_multi configuration: inverter_list=[1, 2], detect_meters=True, detect_batteries=False, detect_extras=True, keep_modbus_open=False, adv_storage_control=False, adv_site_limit_control=False, allow_battery_energy_reset=False, sleep_after_write=0, battery_rating_adjust=0,
2025-07-10 10:14:46.974 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] pymodbus version 3.9.2
2025-07-10 10:14:46.974 DEBUG (MainThread) [custom_components.solaredge_modbus_multi] Retry limit=5 time=800 ratio=3
2025-07-10 10:14:46.975 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] New AsyncModbusTcpClient: reconnect_delay=0 reconnect_delay_max=3 timeout=3 retries=3
2025-07-10 10:14:46.975 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Connecting to 192.168.0.129:1502 ...
2025-07-10 10:14:47.077 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] coordinator timeout is 67.2
2025-07-10 10:14:47.077 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for inverter at 192.168.0.129 ID 1
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=69 requested=69 address=40000 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=1, address=0, count=0, bits=[], registers=[21365, 28243, 1, 65, 21359, 27745, 29253, 25703, 25888, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 21317, 14134, 12336, 18477, 21843, 12336, 12354, 17737, 13312, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 12336, 12340, 11824, 12338, 12846, 12336, 13364, 0, 14132, 12356, 17217, 13892, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1], status=1)
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_SunSpec_ID 0x53756e53<class 'int'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_SunSpec_DID 0x1<class 'int'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_SunSpec_Length 0x41<class 'int'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_Device_address 0x1<class 'int'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_Manufacturer SolarEdge<class 'str'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_Model SE7600H-US000BEI4<class 'str'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_Option <class 'str'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_Version 0004.0022.0044<class 'str'>
2025-07-10 10:14:47.110 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: C_SerialNumber 740DCA6D<class 'str'>
2025-07-10 10:14:47.132 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=9 requested=9 address=40121 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=2, address=0, count=0, bits=[], registers=[1, 65, 21359, 27745, 29253, 25703, 25856, 0, 0], status=1)
2025-07-10 10:14:47.132 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1 MMPPT: mmppt_DID 0x1 <class 'int'>
2025-07-10 10:14:47.132 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1 MMPPT: mmppt_Length 0x41 <class 'int'>
2025-07-10 10:14:47.132 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1 MMPPT: mmppt_Units 0x0 <class 'int'>
2025-07-10 10:14:47.132 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1 is NOT Multiple MPPT
2025-07-10 10:14:47.132 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for meter I1M1
2025-07-10 10:14:47.172 ERROR (MainThread) [homeassistant] Error doing job: Unclosed client session (None)
2025-07-10 10:14:47.173 ERROR (MainThread) [homeassistant] Error doing job: Unclosed connector (None)
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=67 requested=67 address=40121 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=3, address=0, count=0, bits=[], registers=[1, 65, 21359, 27745, 29253, 25703, 25856, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 21317, 11602, 18253, 21586, 11569, 17453, 12852, 12355, 11586, 0, 0, 0, 0, 0, 0, 0, 20594, 28516, 30051, 29801, 28526, 0, 0, 0, 14137, 0, 0, 0, 0, 0, 0, 0, 13873, 13111, 12598, 13881, 13824, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1], status=1)
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_SunSpec_DID 0x1 <class 'int'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_SunSpec_Length 0x41 <class 'int'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_Device_address 0x1 <class 'int'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_Manufacturer SolarEdge <class 'str'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_Model SE-RGMTR-1D-240C-B <class 'str'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_Option Production <class 'str'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_Version 79 <class 'str'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M1: C_SerialNumber 613716696 <class 'str'>
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Found I1M1
2025-07-10 10:14:47.177 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for meter I1M2
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=67 requested=67 address=40295 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=4, address=0, count=0, bits=[], registers=[1, 65, 21359, 27745, 29253, 25703, 25856, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 21317, 11602, 18253, 21586, 11569, 17453, 12852, 12355, 11586, 0, 0, 0, 0, 0, 0, 0, 17784, 28783, 29300, 11081, 28016, 28530, 29696, 0, 14137, 0, 0, 0, 0, 0, 0, 0, 13873, 13111, 12598, 13881, 13824, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1], status=1)
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_SunSpec_DID 0x1 <class 'int'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_SunSpec_Length 0x41 <class 'int'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_Device_address 0x1 <class 'int'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_Manufacturer SolarEdge <class 'str'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_Model SE-RGMTR-1D-240C-B <class 'str'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_Option Export+Import <class 'str'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_Version 79 <class 'str'>
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M2: C_SerialNumber 613716696 <class 'str'>
2025-07-10 10:14:47.248 WARNING (MainThread) [custom_components.solaredge_modbus_multi.hub] Duplicate serial 613716696 on I1M2
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Found I1M2
2025-07-10 10:14:47.248 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for meter I1M3
2025-07-10 10:14:47.287 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=67 requested=67 address=40469 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=5, address=0, count=0, bits=[], registers=[701, 153, 1, 1, 65535, 1, 0, 0, 65535, 65535, 193, 193, 11, 100, 32768, 2461, 1230, 0, 60009, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 32768, 32768, 32768, 32768, 32768, 32768, 32768, 32768, 32768, 65535, 65535, 65535, 2461, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 32768, 32768, 32768], status=1)
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_SunSpec_DID 0x2bd <class 'int'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_SunSpec_Length 0x99 <class 'int'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_Device_address 0x8000 <class 'int'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_Manufacturer ����d � <class 'str'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_Model i <class 'str'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_Option <class 'str'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_Version <class 'str'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: C_SerialNumber <class 'str'>
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1M3: Meter 3 ident incorrect or not installed.
2025-07-10 10:14:47.288 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for inverter at 192.168.0.129 ID 2
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: Registers received=69 requested=69 address=40000 result=ReadHoldingRegistersResponse(dev_id=2, transaction_id=6, address=0, count=0, bits=[], registers=[21365, 28243, 1, 65, 21359, 27745, 29253, 25703, 25888, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 21317, 13872, 12336, 18477, 21843, 12336, 12354, 17737, 13312, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 12336, 12340, 11824, 12338, 13102, 12336, 12855, 0, 14132, 12356, 16697, 16709, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2], status=1)
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_SunSpec_ID 0x53756e53<class 'int'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_SunSpec_DID 0x1<class 'int'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_SunSpec_Length 0x41<class 'int'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_Device_address 0x2<class 'int'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_Manufacturer SolarEdge<class 'str'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_Model SE6000H-US000BEI4<class 'str'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_Option <class 'str'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_Version 0004.0023.0027<class 'str'>
2025-07-10 10:14:47.454 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: C_SerialNumber 740DA9AE<class 'str'>
2025-07-10 10:14:47.602 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: Registers received=9 requested=9 address=40121 result=ReadHoldingRegistersResponse(dev_id=2, transaction_id=7, address=0, count=0, bits=[], registers=[1, 65, 21359, 27745, 29253, 25703, 25856, 0, 0], status=1)
2025-07-10 10:14:47.603 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2 MMPPT: mmppt_DID 0x1 <class 'int'>
2025-07-10 10:14:47.603 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2 MMPPT: mmppt_Length 0x41 <class 'int'>
2025-07-10 10:14:47.603 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2 MMPPT: mmppt_Units 0x0 <class 'int'>
2025-07-10 10:14:47.603 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2 is NOT Multiple MPPT
2025-07-10 10:14:47.603 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for meter I2M1
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: Registers received=67 requested=67 address=40121 result=ReadHoldingRegistersResponse(dev_id=2, transaction_id=8, address=0, count=0, bits=[], registers=[1, 65, 21359, 27745, 29253, 25703, 25856, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 21317, 11602, 18253, 21586, 11569, 17453, 12852, 12355, 11586, 0, 0, 0, 0, 0, 0, 0, 20594, 28516, 30051, 29801, 28526, 0, 0, 0, 14137, 0, 0, 0, 0, 0, 0, 0, 13873, 13111, 12596, 12593, 13568, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1], status=1)
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_SunSpec_DID 0x1 <class 'int'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_SunSpec_Length 0x41 <class 'int'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_Device_address 0x1 <class 'int'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_Manufacturer SolarEdge <class 'str'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_Model SE-RGMTR-1D-240C-B <class 'str'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_Option Production <class 'str'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_Version 79 <class 'str'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M1: C_SerialNumber 613714115 <class 'str'>
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Found I2M1
2025-07-10 10:14:47.736 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for meter I2M2
2025-07-10 10:14:47.883 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: Registers received=67 requested=67 address=40295 result=ReadHoldingRegistersResponse(dev_id=2, transaction_id=9, address=0, count=0, bits=[], registers=[701, 153, 1, 1, 65535, 1, 0, 0, 65535, 65535, 226, 226, 12, 100, 32768, 2458, 1229, 0, 60013, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 32768, 32768, 32768, 32768, 32768, 32768, 32768, 32768, 32768, 65535, 65535, 65535, 2458, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 32768, 32768, 32768], status=1)
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_SunSpec_DID 0x2bd <class 'int'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_SunSpec_Length 0x99 <class 'int'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_Device_address 0x8000 <class 'int'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_Manufacturer ���d � <class 'str'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_Model m <class 'str'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_Option <class 'str'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_Version <class 'str'>
2025-07-10 10:14:47.884 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: C_SerialNumber <class 'str'>
2025-07-10 10:14:47.885 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M2: Meter 2 ident incorrect or not installed.
2025-07-10 10:14:47.885 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] Looking for meter I2M3
2025-07-10 10:14:47.995 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2: Registers received=67 requested=67 address=40469 result=ReadHoldingRegistersResponse(dev_id=2, transaction_id=10, address=0, count=0, bits=[], registers=[65535, 0, 1, 2, 65535, 63487, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 0, 65534, 0, 0, 65535, 0, 0, 703, 17, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65534, 65533, 704, 65, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535, 65535], status=1)
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_SunSpec_DID 0xffff <class 'int'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_SunSpec_Length 0x0 <class 'int'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_Device_address 0xffff <class 'int'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_Manufacturer �� <class 'str'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_Model � <class 'str'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_Option � <class 'str'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_Version <class 'str'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: C_SerialNumber �A <class 'str'>
2025-07-10 10:14:47.996 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I2M3: Meter 3 ident incorrect or not installed.
2025-07-10 10:14:48.042 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=8 requested=8 address=40044 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=11, address=0, count=0, bits=[], registers=[12336, 12340, 11824, 12338, 12846, 12336, 13364, 0], status=1)
2025-07-10 10:14:48.073 DEBUG (MainThread) [custom_components.solaredge_modbus_multi.hub] I1: Registers received=40 requested=40 address=40069 result=ReadHoldingRegistersResponse(dev_id=1, transaction_id=12, address=0, count=0, bits=[], registers=[102, 50, 784, 784, 65535, 65535, 65534, 2456, 65535, 65535, 1228, 1228, 65535, 65535, 19242, 65535, 60012, 65533, 19274, 65535, 11112, 65534, 9983, 65534, 255, 24533, 0, 5289, 65533, 3693, 65535, 19535, 65535, 32768, 4056, 32768, 32768, 65534, 4, 0], status=1)

[WillCodeForCats]

There should be more logs, I need to see all of them especially the parts where it it tries to read the inverter data up through the coordinator false message.

You can also try turning off the "Auto-Detect Additional Entities" option.

[Menz01]

hmmmm just disabling "auto detect additional entities" seems to have fixed the issue. i wonder why that is?

[WillCodeForCats]

Your inverters may have had a firmware update recently.

SolarEdge changed the way they handle unsupported functions in some firmware versions. The best way is to return an "unsupported" response, which is what older firmware does like the version my inverters are at (0004.0014.0229). Either some or all newer versions change that behavior can changed to stop responding and time out or fail connection instead of returning the "unsupported" response.

I've tried several ways to work around this but based on what happened with your inverters it's still not good enough for the best user experience.

Many releases ago the default for "Auto-Detect Additional Entities" was enabled. I changed the default to disabled because of this issue for new users. But if you were using the integration before the default changed the old default would continue, so you might not know why it suddenly is having a problem when it doesn't look like anything changed.

[Menz01]

thank you

[cyberkryten]

Seems like there's been firmware pushed out that causes issues with Modbus TCP - my inverter went offline overnight.

I was on 4.22.44. I am now on 4.23.36, which isn't even listed on the SE Website

At 06:43 the connection failed and no amount of Integration or Home Assistant restarts would bring it back.

The integrations failed to connect:

2025-07-13 06:43:54.893 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:10.380 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:11.482 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:13.586 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:17.688 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:25.800 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:41.903 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    
2025-07-13 06:44:57.377 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)  

Probes showed no response at all from the inverter on Port 1502, I had to physically connect to the inverter from my phone and go into the SE App to diagnose.

It showed that Modbus TCP was still enabled.

However, once I had set Modbus TCP to disabled, than then back to Enabled it immediately started accepting connections again - hopefully this will help someone else!

[Spacerat76]

Seems like there's been firmware pushed out that causes issues with Modbus TCP - my inverter went offline overnight.

I was on 4.22.44. I am now on 4.23.36, which isn't even listed on the SE Website

At 06:43 the connection failed and no amount of Integration or Home Assistant restarts would bring it back.

The integrations failed to connect:

2025-07-13 06:43:54.893 WARNING (MainThread) [pymodbus.logging] Failed to connect [Errno 111] Connect call failed ('10.0.111.75', 1502)                                                                                                    

Probes showed no response at all from the inverter on Port 1502, I had to physically connect to the inverter from my phone and go into the SE App to diagnose.

It showed that Modbus TCP was still enabled.

However, once I had set Modbus TCP to disabled, than then back to Enabled it immediately started accepting connections again - hopefully this will help someone else!

I have the same problem and the same firmware.
But I do not have access to the SE App (only monitoring is possible).

Turning off/on the inverter did not work.

I raised a ticket to the SolarEdge support, maybe other can to the same, if they face the same issue!

[cyberkryten]

You can access the inverter settings by moving the momentary switch to the P side and then connecting to the Wifi access point that appears.

Then look at the Wifi settings to see the 'Default Gateway' given. Usually this seems to be 172.16.0.1 so put that address into a web browser on the device that is connected and you'll be able to access the settings from there.

You want Site Communication then Modbus TCP. Change it to Disabled, wait a minute and change it back to Enabled.

Don't touch anything else! All risks your own, etc etc

[joelegg]

Mine stopped working today too i'm going to have to work out a way to automatically disable and enable ethernet on this solar edge inverter. Annoying that solar edge broke it

[jluc2808]

got some connection failed too, since the 24/07 (after an upgrade of the inverter)
2025-07-31 00:28:30.874 WARNING (MainThread) [pymodbus.logging] Failed to connect 2025-07-31 00:38:30.522 WARNING (MainThread) [pymodbus.logging] ERROR: expected transaction 443 but got 442, IGNORING.

[Daverover66]

I just wanted to drop in and report that disabling and re-enabling the Modbus TCP setting in the inverter settings > Site Communications (SetApp) worked for me.

I've been using this custom integration for about 3 years now.

I updated my inverter firmware to 4.2.36 in early July. Home Assistant had been reporting quite frequent modbus disconnnections, but they always cleared and reconnected.

Until last night.

I updated Home Assistant Core to 2025.7.4 yesterday morning and at 2133 last night the modbus connection dropped and wouldn't reconnect. I found this issue and tried unchecking the "Auto-Detect Additional Entities" box but that made no difference. I left it for the night knowing that today was going to be a good solar day and the SE app would suffice for now.

This morning I went into the inverter settings in SetApp > Site Communication, for anyone looking, disabled Modbus TCP, waited 30 seconds and enabled it again. Home Assistant picked up the connection again almost instantly.

I'll continue to monitor, but hopefully we have a temporary fix until the repo owner can implement a fix.

I'm no coder by the way, but if there's anything I can do to help, let me know. Our home energy use is heavily reliant on having the level of control this custom integration gives us so I wouldn't want to see it fall over completely.

[Daverover66]

That's the second time in 48 hours my modbus connection has been unable to connect with Home Assistant. Toggling the Modbus TCP setting off and on again worked, again. I've got my polling frequency set to 30s and a Home Assistant automation that reloads the config every 3 hours. Not sure if any of that is helping, or indeed making things worse.