Three_Button_LED_Project

An Arduino project to control 3 LEDs using 3 pushbuttons.

Components Used:

• Arduino Uno R3
• Breadboard
• 3x LEDs (Red, Blue, Grey)
• 3x 220Ω resistors (for LEDs)
• 3x Pushbuttons
• 3x 10kΩ resistors (for buttons - pull-down)
• Jumper wires

Circuit Description:

• Each pushbutton is connected to a digital input pin (2, 4, 7).
• Each LED is connected to a digital output pin (8, 12, 13).
• Pull-down resistors ensure proper button reading.
• When a button is pressed, the corresponding LED turns on for 300ms.

Code:

The code is in the file main.ino

Tinkercad Link:

(https://www.tinkercad.com/