ARM I2C drivers

ARM I2C Drivers for various components

Requires

• sarmfsw

  • sarmfsw

• HARMcksL (following used components(s))

  • HARMcksL

Usage

• define I2C_$CPNT$ in a file called globals.h with the I2C instance you want it to be tied to (no neeed to declare instance in case of multiple devices)
• define I2C_$CPNT$_NB with number of devices to enable multiple devices
• define $CPNT$_BASE_ADDR with base device address if in the need to override default address defined in header
• use $CPNT$_Init(idx, hi2c, devAddress) for every device with its index, proper instance and I2C address
  • I2CMEM type is generic and needs 2 more parameters: storage size and write buffer size (can be set to 0 for FRAM)
• use $CPNT$_Init_Single() once in case of single device using defaults
  • I2CMEM type is generic and needs 2 parameters: storage size and write buffer size (can be set to 0 for FRAM)
• start using $CPNT$_funcs()

Remarks

• define VERBOSE in compiler options to printf infos from component handlers
• define NO_WARN_I2C_DRIVERS at project level to disable possible warning messages when multiple devices declared which may have same address
• Components with a xxx_proc file can access I2C_slave instance through CPNT->cfg.slave_inst. Please keep in mind some components are somewhat custom and needs to be accesses through CPNT->cfg.slave_inst_xxx instead if needed.

Supported devices

EEPROM / FRAM:

• I2CMEM: Any EEPROM / FRAM

  • STATUS: DONE
  • Use I2CMEM when compatibility between EEPROM/FRAM is needed
  • Check I2CMEM_ex.h for a few components init aliases
  • In case FRAM is only useful, you may use legacy FM24C or MB85RC256V components, or set buf_size to I2CMEM_WBUF_NONE at init
  • Transaction timeout set to 500ms:
    • There shouldn't be any timeout reached for these components, otherwise refer to MB85RC256V comment

• FM24C: 4/16-Kbit (512/2K * 8) Serial I2C F-RAM

  • STATUS: DONE
  • I2C_Drivers legacy FRAM component, consider switching to I2CMEM for new designs
  • Use FM24C for I2C addresses banked components (with 8b internal address):
    • Tested on:
      • FM24C16B
      • FM24C04B
      • BR24T04FVM
  • Transaction timeout set to 500ms:
    • There shouldn't be any timeout reached for these components, otherwise refer to MB85RC256V comment

• MB85RC256V: 256-Kbit (32K * 8) I2C Memory FRAM

  • STATUS: DONE
  • I2C_Drivers legacy FRAM component, consider switching to I2CMEM for new designs
  • Use MB85RC256V for 16b internal addresses components:
    • Tested on:
      • MB85RC256V
      • FM24CL64B
  • Transaction timeout set to 500ms:
    • For bigger size components, in case timeout is reached, read/write transactions may be split in multiple calls (refreshing watchdog if in use).
    • Set a longer timeout by calling I2C_set_slave_timeout in init sequence is another way to address such a need

OTHER:

• ADS1115: Ultra-Small, Low-Power, 16-Bit Analog-to-Digital Converter with Internal Reference

  • STATUS: DONE

• AMG88: Infrared Array Sensor (Grid-EYE)

  • STATUS: DONE (TODO: recognition)

• APDS9930: Digital Proximity and Ambient Light Sensor

  • STATUS: DONE

• APDS9960: Digital Proximity, Ambient Light, RGB and Gesture Sensor

  • STATUS: DONE (TODO: GESTURES TO TEST/SWITCH, DISABLED YET)

• AT42QT1244: 24-key QMatrix FMEA IEC/EN/UL60730 Touch Sensor

  • STATUS: DONE

• BMP180: Digital pressure sensor

  • STATUS: DONE

• DRV2605L: 2 to 5.2V Haptic Driver for LRA and ERM With Effect Library and Smart-Loop Architecture

  • STATUS: DONE

• DS-GPM.S: 99 Channel Positioning System (GPS + GLONASS) Shield

  • STATUS: DONE

• MCP4725: 12-Bit Digital-to-Analog Converter with EEPROM Memory

  • STATUS: DONE

• MCP9808: +/-0.5C Maximum Accuracy Digital Temperature Sensor

  • STATUS: DONE

• MTCH6102: Low-Power Projected Capacitive Touch Controller

  • STATUS: DONE

• NCA9595: Low-voltage 16-bit I²C and SMBus I/O expander

  • STATUS: DONE

• PCA9532: 16-bit I2C-bus LED dimmer

  • STATUS: DONE

• PCA9624: 8-bit Fm+ I2C-bus 100mA 40V LED driver

  • STATUS: DONE

• PCA9685: 16-channel, 12-bit PWM Fm+ I2C-bus LED controller

  • STATUS: DONE

• PCA9952: 16-channel Fm+ I2C-bus 57 mA constant current LED driver (compatible with PCA9955)

  • STATUS: DONE

• PCA9956: 24-channel Fm+ I2C-bus 57 mA/20 V constant current LED driver

  • STATUS: DONE

• PCF8523: Real-Time Clock (RTC) and calendar

  • STATUS: DONE (TODO: handle clkout and alarms)

• S11059: I2C interface-compatible color sensor

  • STATUS: DONE

• TCS3400: Color light-to-digital converter

  • STATUS: DONE (TODO: auto-integration & persistence in the works)

• TCS3472: Color light-to-digital converter with IR filter

  • STATUS: DONE (TODO: auto-integration & persistence in the works)

• TMP1075: Temperature Sensor With I2C and SMBus Interface in Industry Standard LM75 Form Factor and Pinout

  • STATUS: In progress

• TSL2591: Very-high sensitivity light-to-digital converter

  • STATUS: DONE (TODO: auto-integration & persistence in the works)

Multiple component type on single project (singleton components excluded)

• If multiple component type are used on the same MCU device:
  • A for loop can be used passing I2C_$CPNT$ if all components are tied to the same i2C instance (physical bus)
  • In case same multiple same component type are used on different physical busses, please pass each instance to $CPNT$_Init
    • note: formerly, I2C_$CPNT$ was used to determine device type enabling (and its instance); as long as enabled with former I2C_$CPNT$, init function can be called using other params

Following peripherals (?)

• Capacitive (MPR121)
• OLED
• Clock Generator (SI5351 with help of etherkit)
• Accelerometer/Gyro (GY521 MPU6050 with help of jrowberg)
• ...

You may also:

• contribute with more devices using templates in subfolder
  • if in doubt, multiple template implementation is recommended
• raise issue on github to ask for particular devices

Limitations

• Compatibility with interrupt driven R/W transactions (when possible & usefull, yet already tested manually on some components)

TODO

• Any RTOS compatibility (blocking transactions doesn't match with RTOS task timings)
• (FreeRTOS) compatibility using R/W functions using interrupts with callbacks (when possible)

Misc

Feel free to share your thoughts @ xgarmanboziax@gmail.com about:

• issues encountered (might also raise issue on github directly)
• optimizations
• improvements & new functionalities