wayland-protocols: Update to 1.45

thirdparty/README.md

@@ -1185,7 +1185,7 @@ Files extracted from upstream source:
 # wayland-protocols
 
 - Upstream: https://gitlab.freedesktop.org/wayland/wayland-protocols
-- Version: 1.33 (54346071a5f211f2c482889f2c8ee3b5ecda63ab, 2024)
+- Version: 1.45 (0091197f5c1b1f2c131f1410e99f9c95d50646be, 2025)
 - License: MIT
 
 Files extracted from upstream source:

thirdparty/wayland-protocols/stable/tablet/README

@@ -1,4 +1,4 @@
 Tablet protocol
 
 Maintainers:
-Peter Hutterer <peter.hutterer@who-t.net>
+Peter Hutterer <peter.hutterer@who-t.net> (@whot)

thirdparty/wayland-protocols/stable/tablet/tablet-v2.xml

@@ -1,9 +1,9 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<protocol name="tablet_unstable_v2">
+<protocol name="tablet_v2">
 
   <copyright>
     Copyright 2014 © Stephen "Lyude" Chandler Paul
-    Copyright 2015-2016 © Red Hat, Inc.
+    Copyright 2015-2024 © Red Hat, Inc.
 
     Permission is hereby granted, free of charge, to any person
     obtaining a copy of this software and associated documentation files
@@ -104,18 +104,9 @@
     compositor-specific policy when a tool can be removed. Common approaches
     will likely include some form of removing a tool when all tablets the
     tool was used on are removed.
-
-    Warning! The protocol described in this file is experimental and
-    backward incompatible changes may be made. Backward compatible changes
-    may be added together with the corresponding interface version bump.
-    Backward incompatible changes are done by bumping the version number in
-    the protocol and interface names and resetting the interface version.
-    Once the protocol is to be declared stable, the 'z' prefix and the
-    version number in the protocol and interface names are removed and the
-    interface version number is reset.
   </description>
 
-  <interface name="zwp_tablet_manager_v2" version="1">
+  <interface name="zwp_tablet_manager_v2" version="2">
     <description summary="controller object for graphic tablet devices">
       An object that provides access to the graphics tablets available on this
       system. All tablets are associated with a seat, to get access to the
@@ -139,7 +130,7 @@
     </request>
   </interface>
 
-  <interface name="zwp_tablet_seat_v2" version="1">
+  <interface name="zwp_tablet_seat_v2" version="2">
     <description summary="controller object for graphic tablet devices of a seat">
       An object that provides access to the graphics tablets available on this
       seat. After binding to this interface, the compositor sends a set of
@@ -190,7 +181,7 @@
     </event>
   </interface>
 
-  <interface name="zwp_tablet_tool_v2" version="1">
+  <interface name="zwp_tablet_tool_v2" version="2">
     <description summary="a physical tablet tool">
       An object that represents a physical tool that has been, or is
       currently in use with a tablet in this seat. Each wp_tablet_tool
@@ -576,7 +567,7 @@
     </enum>
   </interface>
 
-  <interface name="zwp_tablet_v2" version="1">
+  <interface name="zwp_tablet_v2" version="2">
     <description summary="graphics tablet device">
       The wp_tablet interface represents one graphics tablet device. The
       tablet interface itself does not generate events; all events are
@@ -596,19 +587,33 @@
 
     <event name="name">
       <description summary="tablet device name">
+        A descriptive name for the tablet device.
+
+	If the device has no descriptive name, this event is not sent.
+
 	This event is sent in the initial burst of events before the
-	wp_tablet.done event.
+        wp_tablet.done event.
       </description>
       <arg name="name" type="string" summary="the device name"/>
     </event>
 
     <event name="id">
-      <description summary="tablet device USB vendor/product id">
+      <description summary="tablet device vendor/product id">
+	The vendor and product IDs for the tablet device.
+
+	The interpretation of the id depends on the wp_tablet.bustype.
+	Prior to version v2 of this protocol, the id was implied to be a USB
+	vendor and product ID. If no wp_tablet.bustype is sent, the ID
+	is to be interpreted as USB vendor and product ID.
+
+	If the device has no vendor/product ID, this event is not sent.
+	This can happen for virtual devices or non-USB devices, for instance.
+
 	This event is sent in the initial burst of events before the
 	wp_tablet.done event.
       </description>
-      <arg name="vid" type="uint" summary="USB vendor id"/>
-      <arg name="pid" type="uint" summary="USB product id"/>
+      <arg name="vid" type="uint" summary="vendor id"/>
+      <arg name="pid" type="uint" summary="product id"/>
     </event>
 
     <event name="path">
@@ -649,9 +654,36 @@
 	the object.
       </description>
     </event>
+
+    <!-- Version 2 additions -->
+
+    <enum name="bustype" since="2">
+      <description summary="bus type ">
+	Describes the bus types this tablet is connected to.
+      </description>
+      <entry name="usb" value="3" summary="USB"/>
+      <entry name="bluetooth" value="5" summary="Bluetooth"/>
+      <entry name="virtual" value="6" summary="Virtual"/>
+      <entry name="serial" value="17" summary="Serial"/>
+      <entry name="i2c" value="24" summary="I2C"/>
+    </enum>
+
+    <event name="bustype" since="2">
+      <description summary="tablet device bus type">
+	The bustype argument is one of the BUS_ defines in the Linux kernel's
+	linux/input.h
+
+	If the device has no known bustype or the bustype cannot be
+	queried, this event is not sent.
+
+	This event is sent in the initial burst of events before the
+	wp_tablet.done event.
+      </description>
+      <arg name="bustype" type="uint" enum="bustype" summary="bus type"/>
+    </event>
   </interface>
 
-  <interface name="zwp_tablet_pad_ring_v2" version="1">
+  <interface name="zwp_tablet_pad_ring_v2" version="2">
     <description summary="pad ring">
       A circular interaction area, such as the touch ring on the Wacom Intuos
       Pro series tablets.
@@ -765,7 +797,7 @@
     </event>
   </interface>
 
-  <interface name="zwp_tablet_pad_strip_v2" version="1">
+  <interface name="zwp_tablet_pad_strip_v2" version="2">
     <description summary="pad strip">
       A linear interaction area, such as the strips found in Wacom Cintiq
       models.
@@ -881,7 +913,7 @@
     </event>
   </interface>
 
-  <interface name="zwp_tablet_pad_group_v2" version="1">
+  <interface name="zwp_tablet_pad_group_v2" version="2">
     <description summary="a set of buttons, rings and strips">
       A pad group describes a distinct (sub)set of buttons, rings and strips
       present in the tablet. The criteria of this grouping is usually positional,
@@ -984,14 +1016,14 @@
       <description summary="mode switch event">
 	Notification that the mode was switched.
 
-	A mode applies to all buttons, rings and strips in a group
+	A mode applies to all buttons, rings, strips and dials in a group
 	simultaneously, but a client is not required to assign different actions
 	for each mode. For example, a client may have mode-specific button
 	mappings but map the ring to vertical scrolling in all modes. Mode
 	indices start at 0.
 
 	Switching modes is compositor-dependent. The compositor may provide
-	visual cues to the client about the mode, e.g. by toggling LEDs on
+	visual cues to the user about the mode, e.g. by toggling LEDs on
 	the tablet device. Mode-switching may be software-controlled or
 	controlled by one or more physical buttons. For example, on a Wacom
 	Intuos Pro, the button inside the ring may be assigned to switch
@@ -1005,20 +1037,33 @@
 	previous mode, the client should immediately issue a
 	wp_tablet_pad.set_feedback request for each changed button.
 
-	If a ring or strip action in the new mode differs from the action
+	If a ring, strip or dial action in the new mode differs from the action
 	in the previous mode, the client should immediately issue a
-	wp_tablet_ring.set_feedback or wp_tablet_strip.set_feedback request
-	for each changed ring or strip.
+	wp_tablet_ring.set_feedback, wp_tablet_strip.set_feedback or
+	wp_tablet_dial.set_feedback request for each changed ring, strip or dial.
       </description>
       <arg name="time" type="uint" summary="the time of the event with millisecond granularity"/>
       <arg name="serial" type="uint"/>
       <arg name="mode" type="uint" summary="the new mode of the pad"/>
     </event>
+
+    <!-- Version 2 additions -->
+
+    <event name="dial" since="2">
+      <description summary="dial announced">
+	Sent on wp_tablet_pad initialization to announce available dials.
+	One event is sent for each dial available on this pad group.
+
+	This event is sent in the initial burst of events before the
+	wp_tablet_pad_group.done event.
+      </description>
+      <arg name="dial" type="new_id" interface="zwp_tablet_pad_dial_v2"/>
+    </event>
   </interface>
 
-  <interface name="zwp_tablet_pad_v2" version="1">
-    <description summary="a set of buttons, rings and strips">
-      A pad device is a set of buttons, rings and strips
+  <interface name="zwp_tablet_pad_v2" version="2">
+    <description summary="a set of buttons, rings, strips and dials">
+      A pad device is a set of buttons, rings, strips and dials
       usually physically present on the tablet device itself. Some
       exceptions exist where the pad device is physically detached, e.g. the
       Wacom ExpressKey Remote.
@@ -1032,7 +1077,7 @@
       This initial event sequence is terminated by a wp_tablet_pad.done
       event.
 
-      All pad features (buttons, rings and strips) are logically divided into
+      All pad features (buttons, rings, strips and dials) are logically divided into
       groups and all pads have at least one group. The available groups are
       notified through the wp_tablet_pad.group event; the compositor will
       emit one event per group before emitting wp_tablet_pad.done.
@@ -1175,4 +1220,78 @@
       </description>
     </event>
   </interface>
+
+  <interface name="zwp_tablet_pad_dial_v2" version="2">
+    <description summary="pad dial">
+      A rotary control, e.g. a dial or a wheel.
+
+      Events on a dial are logically grouped by the wl_tablet_pad_dial.frame
+      event.
+    </description>
+
+    <request name="set_feedback">
+      <description summary="set compositor feedback">
+	Requests the compositor to use the provided feedback string
+	associated with this dial. This request should be issued immediately
+	after a wp_tablet_pad_group.mode_switch event from the corresponding
+	group is received, or whenever the dial is mapped to a different
+	action. See wp_tablet_pad_group.mode_switch for more details.
+
+	Clients are encouraged to provide context-aware descriptions for
+	the actions associated with the dial, and compositors may use this
+	information to offer visual feedback about the button layout
+	(eg. on-screen displays).
+
+	The provided string 'description' is a UTF-8 encoded string to be
+	associated with this ring, and is considered user-visible; general
+	internationalization rules apply.
+
+	The serial argument will be that of the last
+	wp_tablet_pad_group.mode_switch event received for the group of this
+	dial. Requests providing other serials than the most recent one will be
+	ignored.
+      </description>
+      <arg name="description" type="string" summary="dial description"/>
+      <arg name="serial" type="uint" summary="serial of the mode switch event"/>
+    </request>
+
+    <request name="destroy" type="destructor">
+      <description summary="destroy the dial object">
+	This destroys the client's resource for this dial object.
+      </description>
+    </request>
+
+    <event name="delta">
+      <description summary="delta movement">
+	Sent whenever the position on a dial changes.
+
+	This event carries the wheel delta as multiples or fractions
+	of 120 with each multiple of 120 representing one logical wheel detent.
+	For example, an axis_value120 of 30 is one quarter of
+	a logical wheel step in the positive direction, a value120 of
+	-240 are two logical wheel steps in the negative direction within the
+	same hardware event. See the wl_pointer.axis_value120 for more details.
+
+	The value120 must not be zero.
+      </description>
+      <arg name="value120" type="int" summary="rotation distance as fraction of 120"/>
+    </event>
+
+    <event name="frame">
+      <description summary="end of a dial event sequence">
+	Indicates the end of a set of events that represent one logical
+	hardware dial event. A client is expected to accumulate the data
+	in all events within the frame before proceeding.
+
+	All wp_tablet_pad_dial events before a wp_tablet_pad_dial.frame event belong
+	logically together.
+
+	A wp_tablet_pad_dial.frame event is sent for every logical event
+	group, even if the group only contains a single wp_tablet_pad_dial
+	event. Specifically, a client may get a sequence: delta, frame,
+	delta, frame, etc.
+      </description>
+      <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
+    </event>
+  </interface>
 </protocol>

thirdparty/wayland-protocols/stable/viewporter/README

@@ -3,5 +3,5 @@ Viewporter: cropping and scaling extension for surface contents
 Previously known as wl_scaler.
 
 Maintainers:
-Pekka Paalanen <pekka.paalanen@collabora.co.uk>
+Pekka Paalanen <pekka.paalanen@collabora.co.uk> (@pq)
 

thirdparty/wayland-protocols/stable/viewporter/viewporter.xml

@@ -71,8 +71,7 @@
       src_y, src_width, src_height), and the destination size (dst_width,
       dst_height). The contents of the source rectangle are scaled to the
       destination size, and content outside the source rectangle is ignored.
-      This state is double-buffered, and is applied on the next
-      wl_surface.commit.
+      This state is double-buffered, see wl_surface.commit.
 
       The two parts of crop and scale state are independent: the source
       rectangle, and the destination size. Initially both are unset, that
@@ -149,8 +148,7 @@
 	or negative, or x or y are negative, raise the bad_value protocol
 	error.
 
-	The crop and scale state is double-buffered state, and will be
-	applied on the next wl_surface.commit.
+	The crop and scale state is double-buffered, see wl_surface.commit.
       </description>
       <arg name="x" type="fixed" summary="source rectangle x"/>
       <arg name="y" type="fixed" summary="source rectangle y"/>
@@ -169,8 +167,7 @@
 	contains zero or negative values raises the bad_value protocol
 	error.
 
-	The crop and scale state is double-buffered state, and will be
-	applied on the next wl_surface.commit.
+	The crop and scale state is double-buffered, see wl_surface.commit.
       </description>
       <arg name="width" type="int" summary="surface width"/>
       <arg name="height" type="int" summary="surface height"/>

thirdparty/wayland-protocols/stable/xdg-shell/README

@@ -1,5 +1,5 @@
 xdg shell protocol
 
 Maintainers:
-Jonas Ådahl <jadahl@gmail.com>
-Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
+Jonas Ådahl <jadahl@gmail.com> (@jadahl)
+Mike Blumenkrantz <michael.blumenkrantz@gmail.com> (@zmike)