cpdb-rs

Safe, native Rust async bindings for the Common Print Dialog Backends (CPDB) D-Bus interface.

Overview

cpdb-rs lets Rust applications communicate with CPDB print backends (like cpdb-backend-cups) directly over D-Bus without requiring any C dependencies.

The library uses zbus and tokio to provide a fully asynchronous, memory-safe, and pure-Rust implementation of the CPDB client protocol.

Features

Pure Rust D-Bus Client: No libcpdb-dev or C compiler needed! Everything runs natively over D-Bus using zbus.
Async First: All methods are async and powered by Tokio.
Live Discovery: Subscribe to a native Rust Stream for real-time printer additions, removals, and state changes.
Activation Retry: Gracefully retries printer discovery to handle D-Bus activation race conditions.
Keep-Alive Management: Automatically pings backends to keep them active in the background.
(Optional) Legacy C-FFI bindings available via the ffi feature flag.

Supported platforms

The default (zbus-backend) install is pure Rust and does not link cpdb-libs. Requirements are minimal and Unix-only.

Target	`zbus-backend` (default)	`ffi` (opt-in)
Linux (glibc)	✅ Fully supported. CI runs on Ubuntu.	✅ Fully supported.
macOS	✅ Compiles. Runtime requires a session bus and a CPDB backend.	⚠️ Headers-only. Bindgen parses the headers and the crate compiles with `CPDB_NO_LINK=1`, but linking requires Linux D-Bus — useful only for compile-checks.
Windows	❌ Not supported. Develop inside WSL Ubuntu — the repository on `/mnt/c/…` is reachable from WSL without copying.	❌ Not supported. Use WSL.

At runtime, whichever backend you pick, your system must have at least one CPDB backend service installed (e.g. cpdb-backend-cups) for printer discovery to return anything.

Prerequisites (default `zbus-backend`)

Rust 1.85+ (2024 edition).
A running D-Bus session bus.
At least one CPDB backend service reachable on that bus for anything useful to happen at runtime.

That's it — no C compiler, no libcpdb-dev, no bindgen. Skip straight to Installation.

Prerequisites (for the `ffi` feature)

Everything below is only needed if you opt in with --features ffi (or default-features = false, features = ["ffi"]).

cpdb-libs (≥ 3.0)

The ffi feature targets the cpdb-libs 3.x ABI.

⚠️ Distro packages may be too old. As of mid-2026, Debian / Ubuntu ship cpdb-libs 2.0~b5 in libcpdb-dev. That is incompatible with this crate — installing it leaves you with both libcpdb.so.2 (from apt) and libcpdb.so.3 (from source) and the linker picks the wrong one. Either:

Build from source (recommended until distros catch up), or

Verify your package gives libcpdb.so.3.* with ls /usr/lib*/libcpdb.so.* before relying on it.

Build cpdb-libs 3.x from source:

sudo apt-get install -y \
    build-essential pkg-config autoconf automake libtool libtool-bin \
    gettext autopoint libglib2.0-dev libdbus-1-dev libclang-dev \
    libcups2-dev cups libavahi-common-dev libavahi-client-dev

# If you previously installed apt's older libcpdb*, remove it first:
sudo apt-get remove --purge libcpdb-dev libcpdb2t64 2>/dev/null

git clone --depth=1 https://github.com/OpenPrinting/cpdb-libs.git
cd cpdb-libs
./autogen.sh || autoreconf -fi
./configure --prefix=/usr
make -j"$(nproc)"
sudo make install
sudo ldconfig

Fedora / RHEL: install cpdb-libs-devel from a 3.x-shipping repository, or build from source the same way.

libclang

bindgen needs libclang at build time. On Debian/Ubuntu:

sudo apt-get install -y libclang-dev clang

Installation

Default install — pure Rust, no C dependencies:

[dependencies]
cpdb-rs = "0.1.0"
tokio  = { version = "1.0", features = ["full"] }

Legacy synchronous C-FFI wrappers (requires cpdb-libs 3.x and libclang at build time — see Prerequisites (for the ffi feature)):

[dependencies]
cpdb-rs = { version = "0.1.0", default-features = false, features = ["ffi"] }

Enabling both features at once is supported: the default zbus-backend API and the FFI wrappers coexist.

Quick start

use cpdb_rs::CpdbClient;

#[tokio::main]
async fn main() -> cpdb_rs::Result<()> {
    // Connect to D-Bus and auto-activate available CPDB backends
    let client = CpdbClient::new().await?;
    println!("Connected to {} backend(s).\n", client.backend_count());

    // Retrieve all active printers
    let printers = client.get_all_printers().await?;
    for p in &printers {
        println!("Printer: {} (ID: {})", p.name, p.id);
        println!("  Make & Model: {}", p.make_model);
        println!("  State: {}", p.state);
        println!("  Accepts Jobs: {}", p.accepting_jobs);
    }

    Ok(())
}

Examples

Fetching Printer Options and Media Sizes

use cpdb_rs::CpdbClient;

#[tokio::main]
async fn main() -> cpdb_rs::Result<()> {
    let client = CpdbClient::new().await?;
    let printers = client.get_all_printers().await?;

    if let Some(p) = printers.first() {
        // Fetch specific details using the printer's ID and backend name
        let (options, media) = client.get_printer_details(&p.id, &p.backend).await?;

        println!("Options for {}:", p.name);
        for opt in options {
            println!("  {}: default='{}', choices=[{}]", 
                opt.name, opt.default_value, opt.supported_values.join(", "));
        }
    }
    Ok(())
}

Live Discovery Event Stream

Watch for new printers appearing and disappearing in real-time.

use cpdb_rs::{CpdbClient, DiscoveryEvent};
use futures_util::StreamExt;

#[tokio::main]
async fn main() -> cpdb_rs::Result<()> {
    let client = CpdbClient::new().await?;
    
    // Spawn a background task to keep the backends from automatically
    // timing out and exiting after 30 seconds of inactivity.
    let keep_alive_client = client.clone();
    tokio::spawn(async move {
        let mut interval = tokio::time::interval(std::time::Duration::from_secs(15));
        loop {
            interval.tick().await;
            keep_alive_client.keep_alive_all().await;
        }
    });

    let mut stream = client.discovery_stream().await?;
    println!("Listening for printer changes...");

    while let Some(event) = stream.next().await {
        match event {
            DiscoveryEvent::PrinterAdded(snap) => {
                println!("+ Added: {} ({})", snap.name, snap.backend);
            }
            DiscoveryEvent::PrinterRemoved { id, backend } => {
                println!("- Removed: {} ({})", id, backend);
            }
            DiscoveryEvent::PrinterStateChanged { id, state, accepting_jobs, .. } => {
                println!("~ State Changed: {} is now {} (accepting={})", id, state, accepting_jobs);
            }
        }
    }

    Ok(())
}

You can run any of the shipped examples against your live D-Bus session:

cargo run --example discover_printers    # list every printer every backend reports
cargo run --example filter_printers      # apply a Rust-side filter over the snapshot
cargo run --example get_translations     # localise option / choice labels
cargo run --example print_a_document     # end-to-end job submission

FFI-flavoured examples are gated on the ffi feature:

cargo run --example ffi_basic_usage         --no-default-features --features ffi
cargo run --example ffi_cli_printer_manager --no-default-features --features ffi

Architecture (zbus Backend)

Instead of linking against libcpdb.so and using bindgen (which required unsafe C memory management, callbacks, and manual lifetime tracking), cpdb-rs now uses zbus to speak the D-Bus protocol directly to the print backends. This provides massive benefits:

100% Safe Rust: No raw pointers, no manual memory management, no undefined behavior.
Zero C Dependencies: You don't need libcpdb-dev to compile.
Async Tokio Integration: zbus integrates perfectly with Tokio, allowing you to await D-Bus calls and use Rust Streams for live discovery events.
Activation Retries: Automatically retries initial calls to handle UnknownMethod race conditions when systemd auto-activates D-Bus backends.

Legacy Architecture (C-FFI)

Warning

The C-FFI interface is behind the ffi feature flag and has been moved to the underlying cpdb-sys crate. The default feature is now zbus-backend. To continue using cpdb_rs::Frontend, update your Cargo.toml to: cpdb-rs = { default-features = false, features = ["ffi"] }.

If you have legacy code that still requires the synchronous C-FFI wrappers around cpdb-libs, they are still available by enabling the ffi feature flag in your Cargo.toml. See the ffi module documentation for details.

            ┌───────────────────────────────────────────┐
            │            cpdb_rs::Frontend              │
            │  (D-Bus connection, backend list, hash    │
            │   table of discovered printers)           │
            └─────┬─────────────────────────────────┬───┘
                  │ borrowed                        │ owned
                  │ (lifetime tied to &Frontend)    │ (Drop frees)
                  ▼                                 ▼
       ┌────────────────────┐            ┌──────────────────────┐
       │ Printer<'frontend> │            │ Printer<'static>     │
       │ from get_printer / │            │ from load_from_file  │
       │ find_printer / ... │            └──────────────────────┘
       └────────┬───────────┘
                │
                ├── per-printer settings  (add_setting / clear_setting)
                ├── option lookups        (get_default / get_current / get_option)
                ├── translations         ─ TranslationMap (owned snapshot)
                ├── media                ─ MediaSize, Margins
                └── job submission       (print_file / submit_job / print_fd / print_socket)


                       ┌──────────────────────────┐
                       │     cpdb_rs::Settings     │
                       │  (free-standing serial-   │
                       │   isable settings object) │
                       └──────────────────────────┘
                            ▲
                            │ persisted via save_to_disk / read_from_disk
                            ▼
                   ~/.config/cpdb/ (cpdb-libs-managed location)

Two `add_setting` methods, two scopes (C-FFI)

Method	Scope	Persists across runs?
`Printer::add_setting`	This printer only, in-memory on the printer object	Only if you re-add on each run
`Settings::add_setting`	Free-standing settings collection	Yes, via `Settings::save_to_disk()`

Printer::add_setting is the per-job knob: tweak copies, sides, etc. before calling print_file / submit_job. Settings is the global, serialisable view that cpdb-libs reads back from disk on startup.

Module map

Module	What lives here
`cpdb_rs::client`	(zbus) `CpdbClient` — Main async D-Bus client & discovery logic
`cpdb_rs::events`	(zbus) `DiscoveryEvent`, `PrinterSnapshot` for async streams
`cpdb_rs::media`	(zbus) `MediaCollection`, `MediaInfo`, `MarginInfo`
`cpdb_rs::config`	(zbus) `PrinterConfig` for job submission configuration
`cpdb_rs::options`	`OptionInfo`, `OptionsCollection` (shared across both implementations)
`cpdb_rs::error`	`CpdbError` and the crate-wide `Result` alias
`cpdb_rs::proxy`	(zbus) Auto-generated zbus proxy trait `PrintBackend`
`cpdb_rs::frontend`	(ffi) `Frontend` — D-Bus lifecycle, discovery, default printer
`cpdb_rs::printer`	(ffi) `Printer`, `Margin/Margins`, `MediaSize`, `TranslationMap`
`cpdb_rs::settings`	(ffi) `Settings`, `Options`, `Media`
`cpdb_rs::callbacks`	(ffi) Closure trampolines + `PrinterUpdate` enum
`cpdb_rs::common`	(ffi) `init`, `version`, path/config helpers
`cpdb_rs::util`	(ffi) Internal `CStr` helpers + the `COptions` C-array builder
`cpdb_rs::ffi`	(ffi) Raw bindgen output; everything `unsafe`

Ownership model (C-FFI)

Printer carries a lifetime tied to the Frontend it came from. Borrowed printers (those returned by get_printers, get_printer, find_printer, get_default_printer, ...) cannot outlive their frontend — the compiler checks this for you. Owned printers (Printer::load_from_file) have a 'static lifetime and are freed when dropped.

Printer is intentionally not Send or Sync. cpdb-libs does not lock internally; if you need cross-thread access, wrap the printer in a Mutex (or, more typically, run your printer operations on a single thread).

Frontend is Send but not Sync — for the same reason.

Error handling

CpdbError is #[non_exhaustive], so always include a wildcard arm:

use cpdb_rs::CpdbError;

match some_op() {
    Ok(value) => { /* ... */ }
    Err(CpdbError::NullPointer) => eprintln!("null pointer"),
    Err(CpdbError::NotFound(what)) => eprintln!("not found: {what}"),
    Err(CpdbError::JobFailed(msg)) => eprintln!("job failed: {msg}"),
    Err(e) => eprintln!("other: {e}"),
}

Building the `ffi` feature on macOS

The ffi feature can be compiled on macOS but not linked without a Linux D-Bus environment. Use CPDB_NO_LINK=1 to skip link directives:

CPDB_NO_LINK=1 cargo build --lib --no-default-features --features ffi

The default zbus-backend build has no such caveat on macOS.

Testing

# Unit tests — no live D-Bus required
cargo test --workspace

# Integration tests — require a running session bus and CPDB backends
cargo test --workspace -- --ignored

Troubleshooting

Default (`zbus-backend`)

D-Bus connection failed / zbus: Address::from_env failed — Confirm a session bus is running (echo $DBUS_SESSION_BUS_ADDRESS) and that CPDB backend services (e.g. cpdb-backend-cups) are installed. In headless environments spin up an ephemeral bus with dbus-launch --exit-with-session <command>.
No printers found — Verify printers are configured in the underlying spooler (CUPS, IPP, …) and the corresponding CPDB backend service is reachable over the session bus. A backend can take a moment to auto-activate; CpdbClient retries a few times, but a fully idle bus will still return an empty list.
Windows is not supported — no CPDB backend daemon exists on Windows. Develop inside WSL Ubuntu; the repository on /mnt/c/… is reachable from WSL without copying.

`ffi` feature only

undefined symbol: cpdbGetVersion / libcpdb.so.3, may conflict with libcpdb.so.2 — You have apt's older cpdb-libs 2.x installed alongside the source-built 3.x. The linker is picking the v2 library. Fix:

sudo apt-get remove --purge libcpdb-dev libcpdb2t64
sudo ldconfig
cd ~/cpdb-libs && sudo make install   # reinstall headers v2 took with it
cd /path/to/your/project && cargo clean && cargo build --features ffi

fatal error: 'cpdb/cpdb.h' file not found — Headers are missing from /usr/include/cpdb/. Reinstall cpdb-libs from source (see Prerequisites (for the ffi feature)).
Unable to find libclang (bindgen) — Install libclang-dev and clang (Debian/Ubuntu) or the equivalent on your distro.
cpdb-libs not found — Install cpdb-libs 3.x so pkg-config can locate cpdb.pc. Override the discovery path with CPDB_LIBS_PATH=<prefix> when working against an uninstalled checkout.
Linker errors on a non-standard cpdb-libs prefix — Set PKG_CONFIG_PATH=<prefix>/lib/pkgconfig so pkg-config can resolve cpdb and cpdb-frontend from your install.
error: linker 'link.exe' not found on Windows native — The ffi feature does not support Windows targets. Develop inside WSL Ubuntu.

Contributing

See CONTRIBUTING.md.

Fork and clone.
cargo build --workspace --all-targets — the default (zbus-backend) path needs no C dependencies. If you also want to touch the ffi path, install cpdb-libs 3.x first (see Prerequisites (for the ffi feature)) and add --features ffi.
Make changes, add tests.

Ensure the following all pass:

cargo fmt --all -- --check
cargo clippy --workspace --all-targets -- -D warnings
cargo test --workspace --all-targets

Open a pull request.

License

MIT — see LICENSE.

Related projects

cpdb-libs — the upstream C library. cpdb-rs speaks its D-Bus protocol directly on the default backend, and wraps its C API when built with --features ffi.
OpenPrinting
CUPS

Support

Changelog

See CHANGELOG.md.

Name		Name	Last commit message	Last commit date
Latest commit History 120 Commits
.github		.github
cpdb-sys		cpdb-sys
examples		examples
src		src
tests		tests
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
Cargo.lock		Cargo.lock
Cargo.toml		Cargo.toml
LICENSE		LICENSE
PRODUCTION_READINESS.md		PRODUCTION_READINESS.md
README.md		README.md
deny.toml		deny.toml
rustfmt.toml		rustfmt.toml

Uh oh!

Folders and files

Latest commit

History

Repository files navigation

cpdb-rs

Overview

Features

Supported platforms

Prerequisites (default zbus-backend)

Prerequisites (for the ffi feature)

cpdb-libs (≥ 3.0)

libclang

Installation

Quick start

Examples

Fetching Printer Options and Media Sizes

Live Discovery Event Stream

Architecture (zbus Backend)

Legacy Architecture (C-FFI)

Two add_setting methods, two scopes (C-FFI)

Module map

Ownership model (C-FFI)

Error handling

Building the ffi feature on macOS

Testing

Troubleshooting

Default (zbus-backend)

ffi feature only

Contributing

License

Related projects

Support

Changelog

About

Resources

License

Contributing

Uh oh!

Stars

Watchers

Forks

Releases 1

Packages 0

Uh oh!

Uh oh!

Contributors

Uh oh!

Languages

Prerequisites (default `zbus-backend`)

Prerequisites (for the `ffi` feature)

Two `add_setting` methods, two scopes (C-FFI)

Building the `ffi` feature on macOS

Default (`zbus-backend`)

`ffi` feature only

Packages