This repository contains software to load and start the Linux-Kernel on the Behringer WING and some userland tools. The main logic of our custom firmware lives in its own repository at OpenMixerControl
| Description | State |
|---|---|
| Linux boots | ✔️ May 2026 |
| Scribble Strip LCDs | ✔️ June 2026 |
| Surface Input and Output (Buttons, Encoders, Faders, LCDs, LEDs, Touchscreen) | ✔️ June 2026 |
| OpenMixerControl ported to iMX6 | ✔️ June 2026 |
| Trion FPGA Firmware Upload | ✔️ September 2026 |
| Implement FPGA Firmware (TDM Audio Routing) | |
| DSP Firmware Upload | 👀 In Progress |
| Implement DSP1 Firmware (Input) | |
| Implement DSP2 Firmware (Bus) | |
| Implement DSP3 Firmware (FX1) | |
| Implement DSP4 Firmware (FX2) | |
| ADDA-Chips | |
| StageConnect | |
| AES/EBU | |
| AES50 |
- Linux boots 🐧
- USB works
- Screen, Touch and Network is working
- Buttons, Encoders and Faders are basically working, needs more mapping
- LCDs are understood
- OpenMixerControl starts and can be "used", but without the WING audio hardware
i.MX 6 series 32-bit MPU, single ARM Cortex-A9 core, 1GHz, MAPBGA 624 (With VPU, GPU, MLB, EPDC)
- Product Page: https://www.nxp.com/part/MCIMX6S8DVM10AC
- Datasheet: https://www.nxp.com/docs/en/data-sheet/IMX6SDLCEC.pdf