diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
index 688e3f786b736..020213c7936d6 100644
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -75,6 +75,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	fe-pi-audio.dtbo \
 	fsm-demo.dtbo \
 	gc9a01.dtbo \
+	geekworm-x120x.dtbo \
 	ghost-amp.dtbo \
 	goodix.dtbo \
 	googlevoicehat-soundcard.dtbo \
diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README
index 9f7578b8a9e83..5f35ee995124b 100644
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -1561,6 +1561,15 @@ Params: speed                   Display SPI bus speed
         debug                   Debug output level {0-7}
 
 
+Name:   geekworm-x120x
+Info:   Geekworm X120x UPS boards for the Raspberry Pi 5, such as the X1202
+        and X1206. Adds the MAX17040-compatible fuel gauge at I2C address
+        0x36 and a gpio-charger for the GPIO that reports input power, and
+        links the two so the battery can report whether it is charging.
+Load:   dtoverlay=geekworm-x120x,<param>=<val>
+Params: gpio                    GPIO that reports input power (default 6)
+
+
 Name:   ghost-amp
 Info:   An overlay for the Ghost amplifier.
 Load:   dtoverlay=ghost-amp,<param>=<val>
diff --git a/arch/arm/boot/dts/overlays/geekworm-x120x-overlay.dts b/arch/arm/boot/dts/overlays/geekworm-x120x-overlay.dts
new file mode 100644
index 0000000000000..c408468b8a02b
--- /dev/null
+++ b/arch/arm/boot/dts/overlays/geekworm-x120x-overlay.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Definitions for Geekworm X120x UPS boards such as the X1202 and X1206:
+// a MAX17040-compatible fuel gauge on I2C plus a GPIO that reports input
+// power, linked so the battery knows its charger.
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "brcm,bcm2712";
+
+	fragment@0 {
+		target-path = "/";
+		__overlay__ {
+			x120x_charger: charger {
+				compatible = "gpio-charger";
+				gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;
+				charger-type = "mains";
+				status = "okay";
+			};
+		};
+	};
+
+	fragment@1 {
+		target = <&i2c_arm>;
+		__overlay__ {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+
+			x120x_battery: fuel-gauge@36 {
+				compatible = "maxim,max17040";
+				reg = <0x36>;
+				power-supplies = <&x120x_charger>;
+				status = "okay";
+			};
+		};
+	};
+
+	__overrides__ {
+		gpio = <&x120x_charger>,"gpios:4";
+	};
+};