diff --git a/content/en/docs/next/install/_index.md b/content/en/docs/next/install/_index.md
index e0e9740f..d7782f5c 100644
--- a/content/en/docs/next/install/_index.md
+++ b/content/en/docs/next/install/_index.md
@@ -45,6 +45,13 @@ If that's your case, we recommend using the guides below:
 - [Servers.com]({{% ref "/docs/next/install/providers/servers-com" %}})
 
 
+## Proxmox VE
+
+There are two ways to use Cozystack with an existing Proxmox VE cluster, and they can be combined:
+
+- Run the Cozystack cluster itself in Proxmox VE VMs: follow the [generic installation path](#generic-installation-path), treating the VMs like any other machines. Set the VM CPU type to `host` if tenants will run KubeVirt VMs on them.
+- Run the workers of tenant Kubernetes clusters as VMs on Proxmox VE instead of KubeVirt: [enable the Proxmox VE substrate]({{% ref "/docs/next/kubernetes/proxmox-substrate" %}}). This is opt-in and experimental.
+
 ## Upgrading and Post-deployment Configuration
 
 After you've deployed a cluster, proceed to the [Cluster Administration]({{% ref "/docs/next/operations" %}}) section for
diff --git a/content/en/docs/next/kubernetes/proxmox-substrate.md b/content/en/docs/next/kubernetes/proxmox-substrate.md
new file mode 100644
index 00000000..202a9ab6
--- /dev/null
+++ b/content/en/docs/next/kubernetes/proxmox-substrate.md
@@ -0,0 +1,359 @@
+---
+title: "Running Tenant Kubernetes Workers on Proxmox VE"
+linkTitle: "Proxmox VE Substrate"
+description: "Run the worker nodes of managed Kubernetes clusters on an external Proxmox VE cluster instead of KubeVirt, using the Cluster API Proxmox provider, the Proxmox cloud-controller-manager and the Proxmox CSI driver."
+weight: 70
+---
+
+{{< note >}}
+The Proxmox VE substrate is **opt-in and experimental** as of Cozystack v1.7.
+It is shipped in the platform, tested by its maintainer on Proxmox VE 9.2, and
+not yet covered by the project's release gate. Track the decision on support
+tier in [cozystack/cozystack#3481](https://github.com/cozystack/cozystack/issues/3481).
+{{< /note >}}
+
+This page is about running the **workers of tenant clusters** on Proxmox VE.
+To run the management cluster itself on Proxmox VE VMs, follow the regular
+[deployment guide]({{% ref "/docs/next/install" %}}).
+
+## What it is
+
+By default a managed (tenant) Kubernetes cluster in Cozystack has its control
+plane run by Kamaji in the management cluster and its worker nodes run as
+KubeVirt virtual machines inside the same cluster.
+
+With `substrate: proxmox` the control plane stays exactly where it is, and the
+**workers are cloned as VMs on an external Proxmox VE cluster** through the
+Cluster API provider for Proxmox (capmox). No nested virtualization, no
+KubeVirt on the worker path.
+
+```
+Management cluster (Cozystack)                 Proxmox VE cluster
+┌──────────────────────────────────┐           ┌─────────────────────────┐
+│ Kamaji control plane (tenant A)  │◄── join ──│ worker VM  (pool: a)    │
+│ capmox + in-cluster IPAM         │── clone ─►│ worker VM  (pool: a)    │
+│ proxmox-ccm   (tenant ns)        │── API ───►│ worker VM  (pool: b)    │
+│ proxmox-csi controller (tenant ns)│── API ──►│ Talos VM template       │
+└──────────────────────────────────┘           └─────────────────────────┘
+```
+
+| Component | Where it runs | What it does |
+|---|---|---|
+| capmox (`ProxmoxCluster`, `ProxmoxMachineTemplate`) | management cluster, `cozy-cluster-api` | clones worker VMs from a Talos template, assigns static IPs from an in-cluster IPAM pool |
+| Proxmox cloud-controller-manager | management cluster, tenant namespace | sets `providerID`, region/zone labels, clears the `uninitialized` taint on tenant Nodes over the tenant's admin kubeconfig |
+| Proxmox CSI controller | management cluster, tenant namespace | creates and attaches Proxmox disks for tenant PersistentVolumes |
+| Proxmox CSI node plugin | tenant cluster | mounts the disks; carries no hypervisor credential |
+
+The hypervisor token never enters the tenant cluster.
+
+## Support matrix
+
+| | Verified | Notes |
+|---|---|---|
+| Cozystack | v1.7.0-rc.1 and `main` | the substrate is not in v1.6 |
+| Proxmox VE | 9.2.x | 8.x untested; the API calls used exist since 8.x |
+| capmox | v0.7.7 (shipped) | |
+| Proxmox CCM | v0.16.1 (shipped) | pinned by digest |
+| Talos | the version in `kubernetes-nodes` `talos.version` | template must match it |
+| Storage for workers | ZFS pool (linked clones verified) | any storage that supports clones should work; LVM-thin untested |
+| Storage for PVs | any Proxmox storage with `images` content | one storage per tenant recommended, see *Isolation* |
+| Networking | VM NIC on a Proxmox bridge, optional VLAN tag | workers must reach the tenant apiserver's LoadBalancer IP |
+
+## Prerequisites
+
+On the **Proxmox VE** side:
+
+- an API endpoint `https://<pve-host>:8006` reachable from the management cluster;
+- a bridge the workers attach to, with L3 reachability to the management
+  cluster's LoadBalancer range (the tenant apiserver is published as a
+  `LoadBalancer` Service on this substrate);
+- a range of free static IPv4 addresses on that L2 for the workers, not
+  overlapping any DHCP range;
+- a storage the Talos template lives on (workers are linked clones of it by default);
+- reachable DNS resolvers for the workers (they cannot use the management
+  cluster's CoreDNS).
+
+On the **Cozystack** side:
+
+- a working management cluster on a variant with the `iaas` bundle, such as
+  `isp-full` or `isp-full-generic`;
+- a MetalLB / LoadBalancer pool, since each tenant apiserver needs one address.
+
+## 1. Enable the Proxmox provider
+
+The provider is an opt-in package, because it needs a Proxmox API token before
+it can do anything. On a Proxmox VE node, create a user and a token for capmox,
+following the provider's own
+[usage guide](https://github.com/ionos-cloud/cluster-api-provider-proxmox/blob/main/docs/Usage.md):
+
+```bash
+pveum user add capmox@pve
+pveum aclmod / -user capmox@pve -role PVEVMAdmin
+pveum user token add capmox@pve cozystack -privsep 0
+```
+
+`PVEVMAdmin` on `/` is what the provider documents; a narrower set is
+described in its advanced-setup docs. This token is platform-wide: capmox
+clones the workers of every tenant with it (see *Isolation*).
+
+Put the token into the Secret the provider authenticates with.
+capi-operator fetches it first; while it is missing nothing is installed and
+the `InfrastructureProvider` reports the fetch error.
+
+```bash
+kubectl -n cozy-cluster-api create secret generic capmox-config \
+  --from-literal=PROXMOX_URL='https://pve.example.com:8006' \
+  --from-literal=PROXMOX_TOKEN='capmox@pve!cozystack' \
+  --from-literal=PROXMOX_SECRET='<token secret>'
+```
+
+Three things that are easy to get wrong:
+
+- `PROXMOX_URL` is the bare `https://host:8006`; capmox appends `/api2/json` itself.
+- `PROXMOX_TOKEN` is the full id `user@realm!tokenid`, not the token id alone.
+- a rotated token is picked up only after a restart of the capmox manager pod.
+
+Then add the provider to the platform's enabled packages. The in-cluster IPAM
+provider is pulled in as its dependency.
+
+```bash
+kubectl patch packages.cozystack.io cozystack.cozystack-platform --type=merge -p '{
+  "spec": {
+    "components": {
+      "platform": {
+        "values": {
+          "bundles": {
+            "enabledPackages": ["cozystack.capi-provider-infra-proxmox"]
+          }
+        }
+      }
+    }
+  }
+}'
+```
+
+A merge patch replaces the whole list: if `bundles.enabledPackages` already has
+entries, repeat them here.
+
+Check:
+
+```bash
+kubectl -n cozy-cluster-api get infrastructureproviders,ipamproviders
+kubectl -n cozy-cluster-api get deploy | grep -E 'capmox|ipam'
+```
+
+## 2. Prepare a tenant: pool and tokens
+
+For each **tenant** create a resource pool and a dedicated storage, and grant
+the tenant's CCM and CSI tokens their privileges on those paths only. Use
+**privilege-separated tokens** and grant the privileges to the user as well:
+Proxmox caps a token at its user's permissions.
+
+| Component | Privileges | Path |
+|---|---|---|
+| CSI controller | `VM.Audit`, `VM.Config.Disk` | `/pool/<tenant-pool>` |
+| CSI controller | `Datastore.Allocate`, `Datastore.AllocateSpace`, `Datastore.Audit` | `/storage/<tenant-storage>` |
+| CCM | `VM.Audit`, `VM.GuestAgent.Audit` | `/pool/<tenant-pool>` |
+| CCM | `Sys.Audit` | `/` |
+
+```bash
+pveum pool add tenant-a
+pveum user add tenant-a@pve
+pveum user token add tenant-a@pve csi --privsep 1
+pveum user token add tenant-a@pve ccm --privsep 1
+pveum role add CozyCSI -privs "VM.Audit VM.Config.Disk"
+pveum role add CozyCSIStorage -privs "Datastore.Allocate Datastore.AllocateSpace Datastore.Audit"
+pveum role add CozyCCM -privs "VM.Audit VM.GuestAgent.Audit"
+# the user ...
+pveum acl modify /pool/tenant-a          --users tenant-a@pve --roles CozyCSI,CozyCCM
+pveum acl modify /storage/tenant-a-disks --users tenant-a@pve --roles CozyCSIStorage
+pveum acl modify /                       --users tenant-a@pve --roles PVEAuditor
+# ... and each token, which Proxmox caps at the user's permissions
+pveum acl modify /pool/tenant-a          --tokens 'tenant-a@pve!csi' --roles CozyCSI
+pveum acl modify /storage/tenant-a-disks --tokens 'tenant-a@pve!csi' --roles CozyCSIStorage
+pveum acl modify /pool/tenant-a          --tokens 'tenant-a@pve!ccm' --roles CozyCCM
+pveum acl modify /                       --tokens 'tenant-a@pve!ccm' --roles PVEAuditor
+pveum user token permissions tenant-a@pve csi --path /pool/tenant-a
+```
+
+Why a pool: capmox adds every worker VM it clones to `proxmox.pool`,
+replacements included, so an ACL on `/pool/<name>` follows the tenant's VMs
+without being granted again.
+
+## 3. Build the Talos VM template
+
+Workers are cloned from a Talos VM template that already exists on the
+hypervisor. Build it with the script shipped in the repository; it reads
+`talos.version` and `talos.schematicID` from the `kubernetes-nodes` chart so
+the template matches what the chart will render into the machine config.
+Run it from a checkout of the Cozystack version the management cluster runs.
+
+```bash
+# prints the program it would run, for review
+hack/proxmox-talos-template.sh print 9000 local-zfs
+
+# creates the template over ssh on the PVE node
+COZY_PVE_SSH=root@pve.example.com hack/proxmox-talos-template.sh create 9000 local-zfs
+```
+
+The script prints the tags to put into `proxmox.templateTags`. Do **not**
+build the template from the platform's `nocloud-amd64.raw.xz`: that is the
+bare-metal node image, and its `zfs` extension keeps a VM from completing its
+boot, rebooting it every ~70 minutes.
+
+## 4. Create the tenant cluster
+
+```yaml
+apiVersion: apps.cozystack.io/v1alpha1
+kind: Kubernetes
+metadata:
+  name: px
+  namespace: tenant-a
+spec:
+  substrate: proxmox
+  proxmox:
+    allowedNodes: ["pve1", "pve2"]        # empty = every node
+    dnsServers: ["10.0.0.1"]
+    insecure: true                        # stock PVE serves a self-signed cert
+    ipv4Config:
+      addresses: ["10.0.0.120-10.0.0.170"]
+      gateway: "10.0.0.1"
+      prefix: 24
+    ccm:
+      credentialsSecretName: proxmox-ccm   # keys: url, token_id, token_secret, region
+    csi:
+      enabled: true
+      credentialsSecretName: proxmox-csi
+      storageClasses:
+        - name: proxmox
+          storage: tenant-a-disks
+          fstype: ext4
+          reclaimPolicy: Delete
+  # ... the rest of the usual Kubernetes spec
+```
+
+The two credential Secrets live in the **tenant's namespace of the management
+cluster** with the keys `url`, `token_id`, `token_secret`, `region`
+(`region` is the Proxmox cluster's name; the controllers put it on the
+Nodes as `topology.kubernetes.io/region`. Note the URL here carries
+`/api2/json`, unlike capmox's `PROXMOX_URL`):
+
+```bash
+kubectl -n tenant-a create secret generic proxmox-csi \
+  --from-literal=url='https://pve.example.com:8006/api2/json' \
+  --from-literal=token_id='tenant-a@pve!csi' \
+  --from-literal=token_secret='<csi token secret>' \
+  --from-literal=region='pve'
+
+kubectl -n tenant-a create secret generic proxmox-ccm \
+  --from-literal=url='https://pve.example.com:8006/api2/json' \
+  --from-literal=token_id='tenant-a@pve!ccm' \
+  --from-literal=token_secret='<ccm token secret>' \
+  --from-literal=region='pve'
+```
+
+`substrate` is immutable: switching an existing cluster is refused. Create a
+new one.
+
+## 5. Add a worker pool
+
+```yaml
+apiVersion: apps.cozystack.io/v1alpha1
+kind: KubernetesNodes
+metadata:
+  name: px-md0
+  namespace: tenant-a
+spec:
+  cluster: px
+  substrate: proxmox
+  minReplicas: 2
+  maxReplicas: 2
+  resources:
+    cpu: 4
+    memory: 8Gi
+  proxmox:
+    templateTags: ["cozystack", "talos", "talos-v1.13.6", "schematic-ce4c9805"]
+    full: false                 # linked clone (default)
+    network:
+      bridge: vmbr0
+      vlan: 60                  # optional
+    pool: tenant-a
+    dnsServers: ["10.0.0.1"]
+```
+
+`templateTags` must be **equal** to the template's tag set, not a subset: a
+missing tag yields `found 0 VM templates with tags ...` even though the tags
+are plainly present on the template.
+
+`resources.cpu` / `memory` are converted to capmox's `numCores` / `memoryMiB`
+(rounded up).
+
+## 6. Verify
+
+```bash
+# management cluster
+kubectl -n tenant-a get cluster,proxmoxcluster,machinedeployment,machine
+kubectl -n tenant-a get proxmoxmachines -o custom-columns='NAME:.metadata.name,VMID:.spec.virtualMachineID,NODE:.status.proxmoxNode,IP:.status.ipAddresses.net0.ipv4,STATE:.status.vmStatus'
+kubectl -n tenant-a get inclusterippools,ipaddresses.ipam.cluster.x-k8s.io
+kubectl -n tenant-a get deploy kubernetes-px-pccm kubernetes-px-pcsi-controller
+
+# tenant cluster
+kubectl --kubeconfig <tenant kubeconfig> get nodes -o wide
+kubectl --kubeconfig <tenant kubeconfig> get nodes -o custom-columns='NODE:.metadata.name,PROVIDER-ID:.spec.providerID,TAINTS:.spec.taints[*].key'
+kubectl --kubeconfig <tenant kubeconfig> -n csi-proxmox get pods
+```
+
+A healthy node has the same `providerID` as its CAPI `Machine`
+(`proxmox://<SMBIOS UUID>`; the CCM runs in its `capmox` mode for that), the
+`topology.kubernetes.io/region|zone` labels, and no
+`node.cloudprovider.kubernetes.io/uninitialized` taint.
+
+What is covered by the integration and was verified live on PVE 9.2:
+PVC create → attach → online resize → delete; Cluster Autoscaler scale-up and
+scale-down through the pool; rolling replacement of a worker;
+MachineHealthCheck.
+
+## Isolation: what the design gives and what it does not
+
+- The hypervisor token is composed into the CCM and CSI controllers in the
+  management cluster; nothing copies it into the tenant cluster.
+- The tenant is cluster-admin of its own cluster, and the controllers act on
+  what its objects say: the CSI controller attaches the disk a PV names to the
+  VM a Node names. **Scope comes from the Proxmox ACL**, not from the
+  controllers: one pool and one storage per tenant.
+- A storage shared between tenants cannot be scoped: `Datastore.Allocate` on
+  it reaches every volume on it.
+- capmox itself (VM creation) currently uses one platform-wide token for all
+  tenants; per-tenant `credentialsRef` on `ProxmoxCluster` is being worked on
+  upstream.
+
+## Limitations (v1.7)
+
+- Opt-in, experimental; no release gate yet (an e2e lane exists upstream, but its nightly run is opt-in and currently skipped).
+- Workers only. Cozystack's `vm-disk` / `vm-instance` applications still run on KubeVirt; a Proxmox substrate for them is in design.
+- Tenant `Kubernetes` kinds are published as part of the KubeVirt variant, so a management cluster still needs the KubeVirt packages installed even if every pool runs on Proxmox.
+- No DHCP: capmox assigns static addresses from `ipv4Config` only.
+- Linked clones keep the template's base snapshot referenced; rotate templates by creating a new VMID with new tags and rolling the pool.
+- No live migration awareness: the CCM reports a VM it cannot see as gone and deletes the Node.
+- Cozystack's Terraform provider does not model `substrate`/`proxmox.*` yet; `terraform apply` on such a cluster overwrites them.
+
+## Troubleshooting
+
+| Symptom | Cause | Fix |
+|---|---|---|
+| `InfrastructureProvider` not installing, fetch error | `capmox-config` Secret missing or in the wrong namespace | create it in `cozy-cluster-api` |
+| every API call returns 501 | `PROXMOX_URL` already contains `/api2/json` | use bare `https://host:8006` |
+| `found 0 VM templates with tags ...` | `templateTags` ≠ the template's tag set | list every tag, exactly |
+| Machine `VMProvisioned=True`, node never joins, no CSR | workers cannot reach the tenant apiserver LoadBalancer IP, or no reachable `dnsServers` | fix L3 / DNS |
+| Nodes `Ready` but keep `uninitialized` taint, pool `ScalingUp` forever | CCM not running or crash-looping | `kubectl -n <tenant ns> logs deploy/kubernetes-<cluster>-pccm` |
+| CSI node plugin `CrashLoopBackOff`, `Failed to get region or zone` | CCM has not labelled the node yet | wait for the CCM |
+| VM reboots every ~70 min, never joins | template built from the bare-metal `nocloud` image | rebuild with `hack/proxmox-talos-template.sh` |
+| `TalosConfigTemplate.Spec is immutable` | apiserver address changed on an existing cluster | delete the template; the reconcile Job recreates it |
+| capmox stuck at `Waiting for Cluster Controller to set OwnerRef` | `cluster.x-k8s.io/managed-by` annotation on the `ProxmoxCluster` | not expected from the chart; report it |
+
+## See also
+
+- [Managed Kubernetes]({{% ref "/docs/next/kubernetes" %}}) — the application this page extends
+- Cluster API provider for Proxmox: https://github.com/ionos-cloud/cluster-api-provider-proxmox
+- Proxmox CCM / CSI: https://github.com/sergelogvinov/proxmox-cloud-controller-manager, https://github.com/sergelogvinov/proxmox-csi-plugin
+- Support-tier proposal: https://github.com/cozystack/community/pull/98
diff --git a/content/en/docs/v1.7/install/_index.md b/content/en/docs/v1.7/install/_index.md
index d286a44a..da0198a7 100644
--- a/content/en/docs/v1.7/install/_index.md
+++ b/content/en/docs/v1.7/install/_index.md
@@ -45,6 +45,13 @@ If that's your case, we recommend using the guides below:
 - [Servers.com]({{% ref "/docs/v1.7/install/providers/servers-com" %}})
 
 
+## Proxmox VE
+
+There are two ways to use Cozystack with an existing Proxmox VE cluster, and they can be combined:
+
+- Run the Cozystack cluster itself in Proxmox VE VMs: follow the [generic installation path](#generic-installation-path), treating the VMs like any other machines. Set the VM CPU type to `host` if tenants will run KubeVirt VMs on them.
+- Run the workers of tenant Kubernetes clusters as VMs on Proxmox VE instead of KubeVirt: [enable the Proxmox VE substrate]({{% ref "/docs/v1.7/kubernetes/proxmox-substrate" %}}). This is opt-in and experimental.
+
 ## Upgrading and Post-deployment Configuration
 
 After you've deployed a cluster, proceed to the [Cluster Administration]({{% ref "/docs/v1.7/operations" %}}) section for
diff --git a/content/en/docs/v1.7/kubernetes/proxmox-substrate.md b/content/en/docs/v1.7/kubernetes/proxmox-substrate.md
index 40d7a07e..5dadbe21 100644
--- a/content/en/docs/v1.7/kubernetes/proxmox-substrate.md
+++ b/content/en/docs/v1.7/kubernetes/proxmox-substrate.md
@@ -12,6 +12,10 @@ not yet covered by the project's release gate. Track the decision on support
 tier in [cozystack/cozystack#3481](https://github.com/cozystack/cozystack/issues/3481).
 {{< /note >}}
 
+This page is about running the **workers of tenant clusters** on Proxmox VE.
+To run the management cluster itself on Proxmox VE VMs, follow the regular
+[deployment guide]({{% ref "/docs/v1.7/install" %}}).
+
 ## What it is
 
 By default a managed (tenant) Kubernetes cluster in Cozystack has its control
@@ -46,9 +50,10 @@ The hypervisor token never enters the tenant cluster.
 
 | | Verified | Notes |
 |---|---|---|
-| Cozystack | v1.7.0-rc.1 and `main` | the substrate is not in v1.6 |
+| Cozystack | v1.7.0-rc.1 and `main` | the substrate is not in v1.6; v1.7.0 needs the CCM fix in step 4 |
 | Proxmox VE | 9.2.x | 8.x untested; the API calls used exist since 8.x |
 | capmox | v0.7.7 (shipped) | |
+| Proxmox CCM | v0.16.1 | v1.7.0 ships v0.15.0, which panics; see step 4 |
 | Talos | the version in `kubernetes-nodes` `talos.version` | template must match it |
 | Storage for workers | ZFS pool (linked clones verified) | any storage that supports clones should work; LVM-thin untested |
 | Storage for PVs | any Proxmox storage with `images` content | one storage per tenant recommended, see *Isolation* |
@@ -70,22 +75,28 @@ On the **Proxmox VE** side:
 
 On the **Cozystack** side:
 
-- a working management cluster with the `iaas` bundle;
+- a working management cluster on a variant with the `iaas` bundle, such as
+  `isp-full` or `isp-full-generic`;
 - a MetalLB / LoadBalancer pool, since each tenant apiserver needs one address.
 
-## 1. Enable the packages
+## 1. Enable the Proxmox provider
 
-Add the Proxmox infrastructure provider to the platform's enabled packages.
-The in-cluster IPAM provider is pulled in as its dependency.
+The provider is an opt-in package, because it needs a Proxmox API token before
+it can do anything. On a Proxmox VE node, create a user and a token for capmox,
+following the provider's own
+[usage guide](https://github.com/ionos-cloud/cluster-api-provider-proxmox/blob/main/docs/Usage.md):
 
-```yaml
-# spec.components.platform.values of the cozystack.cozystack-platform Package
-bundles:
-  enabledPackages:
-    - cozystack.capi-provider-infra-proxmox
+```bash
+pveum user add capmox@pve
+pveum aclmod / -user capmox@pve -role PVEVMAdmin
+pveum user token add capmox@pve cozystack -privsep 0
 ```
 
-Before the provider is deployed, create the Secret it authenticates with.
+`PVEVMAdmin` on `/` is what the provider documents; a narrower set is
+described in its advanced-setup docs. This token is platform-wide: capmox
+clones the workers of every tenant with it (see *Isolation*).
+
+Put the token into the Secret the provider authenticates with.
 capi-operator fetches it first; while it is missing nothing is installed and
 the `InfrastructureProvider` reports the fetch error.
 
@@ -102,34 +113,41 @@ Three things that are easy to get wrong:
 - `PROXMOX_TOKEN` is the full id `user@realm!tokenid`, not the token id alone.
 - a rotated token is picked up only after a restart of the capmox manager pod.
 
-Check:
+Then add the provider to the platform's enabled packages. The in-cluster IPAM
+provider is pulled in as its dependency.
 
 ```bash
-kubectl -n cozy-cluster-api get infrastructureproviders,ipamproviders
-kubectl -n cozy-cluster-api get deploy | grep -E 'capmox|ipam'
+kubectl patch packages.cozystack.io cozystack.cozystack-platform --type=merge -p '{
+  "spec": {
+    "components": {
+      "platform": {
+        "values": {
+          "bundles": {
+            "enabledPackages": ["cozystack.capi-provider-infra-proxmox"]
+          }
+        }
+      }
+    }
+  }
+}'
 ```
 
-## 2. Prepare Proxmox: user, tokens, pool
+A merge patch replaces the whole list: if `bundles.enabledPackages` already has
+entries, repeat them here.
 
-Create a user and tokens for the platform. Use **privilege-separated tokens**
-and grant the privileges to the user as well: Proxmox caps a token at its
-user's permissions.
-
-For capmox itself, follow the provider's own
-[usage guide](https://github.com/ionos-cloud/cluster-api-provider-proxmox/blob/main/docs/Usage.md):
+Check:
 
 ```bash
-pveum user add capmox@pve
-pveum aclmod / -user capmox@pve -role PVEVMAdmin
-pveum user token add capmox@pve cozystack -privsep 0
+kubectl -n cozy-cluster-api get infrastructureproviders,ipamproviders
+kubectl -n cozy-cluster-api get deploy | grep -E 'capmox|ipam'
 ```
 
-`PVEVMAdmin` on `/` is what the provider documents; a narrower set is
-described in its advanced-setup docs. This token is platform-wide: capmox
-clones the workers of every tenant with it (see *Isolation*).
+## 2. Prepare a tenant: pool and tokens
 
 For each **tenant** create a resource pool and a dedicated storage, and grant
-the tenant's CCM and CSI tokens their privileges on those paths only:
+the tenant's CCM and CSI tokens their privileges on those paths only. Use
+**privilege-separated tokens** and grant the privileges to the user as well:
+Proxmox caps a token at its user's permissions.
 
 | Component | Privileges | Path |
 |---|---|---|
@@ -168,6 +186,7 @@ Workers are cloned from a Talos VM template that already exists on the
 hypervisor. Build it with the script shipped in the repository; it reads
 `talos.version` and `talos.schematicID` from the `kubernetes-nodes` chart so
 the template matches what the chart will render into the machine config.
+Run it from a checkout of the Cozystack version the management cluster runs.
 
 ```bash
 # prints the program it would run, for review
@@ -223,13 +242,34 @@ Nodes as `topology.kubernetes.io/region`. Note the URL here carries
 kubectl -n tenant-a create secret generic proxmox-csi \
   --from-literal=url='https://pve.example.com:8006/api2/json' \
   --from-literal=token_id='tenant-a@pve!csi' \
-  --from-literal=token_secret='<secret>' \
+  --from-literal=token_secret='<csi token secret>' \
+  --from-literal=region='pve'
+
+kubectl -n tenant-a create secret generic proxmox-ccm \
+  --from-literal=url='https://pve.example.com:8006/api2/json' \
+  --from-literal=token_id='tenant-a@pve!ccm' \
+  --from-literal=token_secret='<ccm token secret>' \
   --from-literal=region='pve'
 ```
 
 `substrate` is immutable: switching an existing cluster is refused. Create a
 new one.
 
+{{< warning >}}
+Cozystack v1.7.0 ships a broken CCM image. The chart runs
+`proxmox-cloud-controller-manager:v0.15.0`, and that tag now resolves to a build
+that panics at start, so workers keep the `uninitialized` taint. The fix is in
+[cozystack/cozystack#5150](https://github.com/cozystack/cozystack/pull/5150) and
+is not released yet. Until then, set the image by hand once the cluster exists.
+The next Helm upgrade of the cluster puts the chart's image back, so repeat this
+after every change to the `Kubernetes` resource.
+{{< /warning >}}
+
+```bash
+kubectl -n tenant-a set image deploy/kubernetes-px-pccm \
+  cloud-controller-manager=ghcr.io/sergelogvinov/proxmox-cloud-controller-manager:v0.16.1@sha256:474dbfd3be5c2e0866e520bc6ddb60b7accef554ca7401488eee35252cdf8734
+```
+
 ## 5. Add a worker pool
 
 ```yaml
@@ -320,6 +360,7 @@ MachineHealthCheck.
 | every API call returns 501 | `PROXMOX_URL` already contains `/api2/json` | use bare `https://host:8006` |
 | `found 0 VM templates with tags ...` | `templateTags` ≠ the template's tag set | list every tag, exactly |
 | Machine `VMProvisioned=True`, node never joins, no CSR | workers cannot reach the tenant apiserver LoadBalancer IP, or no reachable `dnsServers` | fix L3 / DNS |
+| CCM in `CrashLoopBackOff`, `panic: version string "0.15.0"` | the image v1.7.0 ships | set the image as in step 4 |
 | Nodes `Ready` but keep `uninitialized` taint, pool `ScalingUp` forever | CCM not running or crash-looping | `kubectl -n <tenant ns> logs deploy/kubernetes-<cluster>-pccm` |
 | CSI node plugin `CrashLoopBackOff`, `Failed to get region or zone` | CCM has not labelled the node yet | wait for the CCM |
 | VM reboots every ~70 min, never joins | template built from the bare-metal `nocloud` image | rebuild with `hack/proxmox-talos-template.sh` |